Picture & Video settings in Waypoint mode

[llp93200]

Hello to all,

I am using the A3S since now 3 month and really enjoying it. I am still learning all its features ... and there are a lot to !

I haven't found a way to setup the camera setting in manual mode inside the programation of the waypoints.

I am using this waymoint mode quite a lot, for pictures and video capture of POIs and I want to avoid the automatic adjustement that the camera is doing while moving around a POI where indeed the light will change a lot and affect the overall movie image setup and appearance.

I would like to have the camera setup in manual (speed, ISO, color) for each of the 2 cam and haven't found a way, else than forcing it in manual while the waypoint mode is been started, going to pause, setting cam to manual, then re-start, etc...

Any recommandations ? Tips ?

Thanks

 

[llp93200]

Nobody knows then I might be the only one interested by such a feature .

 

[Spikemixture]

Hello to all,

I am using the A3S since now 3 month and really enjoying it. I am still learning all its features ... and there are a lot to !

I haven't found a way to setup the camera setting in manual mode inside the programation of the waypoints.

I am using this waymoint mode quite a lot, for pictures and video capture of POIs and I want to avoid the automatic adjustement that the camera is doing while moving around a POI where indeed the light will change a lot and affect the overall movie image setup and appearance.

I would like to have the camera setup in manual (speed, ISO, color) for each of the 2 cam and haven't found a way, else than forcing it in manual while the waypoint mode is been started, going to pause, setting cam to manual, then re-start, etc...

Any recommandations ? Tips ?

Thanks

I am new to waypoints and am using lithchihub - Litchi Hub
You plan your mission on your pc and with a bit of stuffing around you get it to your RC .
Your cannot change the camera settings (you can change the camera) but you may not have to if you have your mission well planned !! Good Luck

 

[llp93200]

I am new to waypoints and am using lithchihub - Litchi Hub
You plan your mission on your pc and with a bit of stuffing around you get it to your RC .
Your cannot change the camera settings (you can change the camera) but you may not have to if you have your mission well planned !! Good Luck

Thanks ! I am also using Litchi to setup my flight. I really like it and hope the Air 3S will soon get the ability to receive directly the kmz files. Anyway for the cam settings either in litchi or with the RC2 have no specific fields to adjust them. This leads to the fact that for a started waypoint path no change can be programmed on the camera. The only tip I found is to start put the waypoint mode in pause, adjust manually the cam setup, and re-start...

 

[Spikemixture]

" I really like it and hope the Air 3S will soon get the ability to receive directly the kmz files." ??
I copy my mission planned on (Litchi Hub) my PC to the RC2 and RCpro2 . As i said there is some stuffing around but after a few times you get the sequence and it gets easier...

 

[Paul Harvey]

Nobody knows then I might be the only one interested by such a feature .

I'm interested too. I just don't know the answer :/