Quickshots stopped working

[Spoonduke714]

Hey guys,
New to the Mavic Air. The props hit some oak tree leaves tonight and my air went down. All considered it was a pretty soft landing. No damage to the drone. But now most of the quick shots wont work. It will take a dronie, but when I select a target for any other quick shot and hit "go" it does the countdown, the drone backs up a little, then screen says target lost and a little red bar pops up that says "camera error". Any thoughts or suggestions would be much appreciated.

Thanks

 

[WithTheBirds]

Does the camera take a photo/video? Does the live feed look normal?

Good chance you have managed to damage the gimble/camera when you crashed it.

 

[Spoonduke714]

Does the camera take a photo/video? Does the live feed look normal?

Good chance you have managed to damage the gimble/camera when you crashed it.

Camera and video work as usual. Camera still adjusts up and down with the wheel and gimbal works during flight. Pictures and video still work normally. No scuffs or any evidence the gimbal was struck.

 

[WithTheBirds]

The “camera error” being reported is the clue. The impact may have caused the camera IMU to stick resulting in unexpected values being reported.

Your solution will almost certainly involve a trip to DJI or other competent repairer.

 

[Spoonduke714]

Thanks guys. Got it fixed. Recalibrated the IMU and gimbals. All is back to normal. Thanks for all the suggestions and quick responses.

 

[Racin8de]

The “camera error” being reported is the clue. The impact may have caused the camera IMU to stick resulting in unexpected values being reported.

Your solution will almost certainly involve a trip to DJI or other competent repairer.

Well he fixed it so that trip that was almost certain wasnt needed

 

[WithTheBirds]

Well he fixed it so that trip that was almost certain wasnt needed

Obviously.

We can be lucky on occasion.