Repair Tool For DJI Products

IMU · Oct 19, 2021

Stepping out on a limb here.
I just replaced the gimbal on the Mavic Air 2.
I ran the python script to calibrate the gimbal.
LinearHall
JointCoarse
Calibration was successful.
Now I am getting these error messages.

Gimbal imu data error. Contact dji support for assistance (code: 40021)
Gimbal calibration error. Restart acircraft or contact dji Support if the issue persists. (Code: 40011)
Camera not calibrated Image quality may be affected Contact DJI Support for assistance (code: 30144)

Gimbal and camera are functioning perfect.
Is there any work around software that is known to the forum to correct and clear these messages?
Something like the DJI Repair Tool for DJI products.

Thank You

DDS · Oct 19, 2021

IMU said:
Stepping out on a limb here.
I just replaced the gimbal on the Mavic Air 2.
I ran the python script to calibrate the gimbal.
LinearHall
JointCoarse
Calibration was successful.
Now I am getting these error messages.

Gimbal imu data error. Contact dji support for assistance (code: 40021)
Gimbal calibration error. Restart acircraft or contact dji Support if the issue persists. (Code: 40011)
Camera not calibrated Image quality may be affected Contact DJI Support for assistance (code: 30144)

Gimbal and camera are functioning perfect.
Is there any work around software that is known to the forum to correct and clear these messages?
Something like the DJI Repair Tool for DJI products.

Thank You

To clear the errors you would need to log into the dji servers in mainland china via a dedicated vpn and pair the gimbal sn w/ the drones....nice to see you got it to work though. good job! Only DJI or an approved repair facility would have access..

IMU · Oct 19, 2021

DDS said:
To clear the errors you would need to log into the dji servers in mainland china via a dedicated vpn and pair the gimbal sn w/ the drones....nice to see you got it to work though. good job! Only DJI or an approved repair facility would have access..

Thank you for the speedy response.
I was afraid of the answer.

BSauce955 · Oct 19, 2021

DDS said:
To clear the errors you would need to log into the dji servers in mainland china via a dedicated vpn and pair the gimbal sn w/ the drones....nice to see you got it to work though. good job! Only DJI or an approved repair facility would have access..

Wait, that's possible?

mjnhchj · Nov 11, 2021

Only DJi? No!

DDS · Nov 11, 2021

mjnhchj said:
Only DJi? No!

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Looks like this guy IS LOGGED TO DJI VPN and has login creds. notice how he blanks out the software he using w a smiley...looks similar to dji vpn but cant confirm (2:30 & 2:45) either is dji vpn or some hacked software

BSauce955 · Nov 11, 2021

DDS said:
Looks like this guy IS LOGGED TO DJI VPN and has login creds. notice how he blanks out the software he using w a smiley...looks similar to dji vpn but cant confirm (2:30 & 2:45) either is dji vpn or some hacked software

So are you saying that you cannot change gimbals on the Mavic Air 2/2S?

mjnhchj · Nov 11, 2021

DDS said:
Looks like this guy IS LOGGED TO DJI VPN and has login creds. notice how he blanks out the software he using w a smiley...looks similar to dji vpn but cant confirm (2:30 & 2:45) either is dji vpn or some hacked software

I think, it's hacked software

DDS · Nov 11, 2021

BSauce955 said:
So are you saying that you cannot change gimbals on the Mavic Air 2/2S?

no i am not...

BSauce955 · Nov 11, 2021

DDS said:
no i am not...

Then what's your point?

DDS · Nov 11, 2021

BSauce955 said:
Then what's your point?

chk post #2