Replacing notch on rear arm

[Skeye]

Hi there,
Had anyone tried replacing this plastic notch that keeps the rear arm in position?
One of those is a bit deformed after a mild crash, what now makes that arm a bit lose when extended
Regards,

 

[Haloweenhamster]

It requires a new arm

Top off
3 wires desoldering
3 screws holding it in place 1 back outside 2 inside

 

[Haloweenhamster]

 

[Cyberpower678]

Hi there,
Had anyone tried replacing this plastic notch that keeps the rear arm in position?
One of those is a bit deformed after a mild crash, what now makes that arm a bit lose when extended
Regards,

@Thunderdrones can help you out.

 

[lolo780]

Epoxy and CF plate.

 

[Skeye]

Epoxy and CF plate.

Hi lolo780,

Did you actually replace the 'shoulder' or just glued that panel on top of it?

Regards,

 

[lolo780]

On top. One side was cracked, and the other side was bending upwards.

 

[M K]

I super glued mine very carefully as it was cracked underneath that little ledge. It's as strong as ever now and even without it the ledge the arm seems to have an upper internal restraint in the spring mechanism. When Super gluing make sure to keep pressure on it but rotate the arm to ensure it doesn't get glued up.