Running a Mavic pro out

[Phxbird57]

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

The video is ok mostly showing the telemetry of the flight. and almost running out of juice. the DJI go 4 app was showing 0% for the last 1000ft. On here that 1% hung in there for almost 1/2 miles. The camera turned off at 10% I did not notice it. so the last 2 minutes are edited in from a different flight. Please enjoy the music from The Sahnas Brother. https://theguitarbrothers.com/home

 

[Bill combs]

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

the furthest i’ve gotten my mpp was a little over 18000 in the same area just south of ahwatukee.

 

[Phxbird57]

the furthest i’ve gotten my mpp was a little over 18000 in the same area just south of ahwatukee.

Well we might meet up. You can see where I'm at.

 

[Tkoglin]

Loved the video!

was there any pucker factor towards the end? ?

how did you keep it flying at 1% battery?

 

[Phxbird57]

I did have to seat down for a while. It was a little hard controlling it from 10% down. I had one of my spotters watching the drone come in. I was glued to the telemetry. I did not want to look up . Even knowing it was close. After it landed I started laughing, because the app shown 0% for the last 1000 ft.

 

[Mavic Mac]

Did you do a "cut and splice" @ 20:23 ? All of a sudden the large building in the rear center appears further away and there are more irrigation ditches crossing the view.

 

[Phxbird57]

Did you do a "cut and splice" @ 20:23 ? All of a sudden the large building in the rear center appears further away and there are more irrigation ditches crossing the view.

hello Yes I did. The camera turned off not sure why ( low voltage). I've had that happen before.