Saved Gain / Expo settings Air2S

[Jasleking]

Hi Everyone -

I have an Air2S and have found adjusting the gain / expo settings beneficial for flight dynamics. I understand having the remote switch in the same position as the adjustment in the app is to save the changed setting. I am finding the settings are changing, yet they are not saving the Cine/Normal/Sport modes. I don't see an apply / save button. Am I doing something wrong?

thanks for your time !

 

[akdrone]

Maybe I don't quite understand the issue but you know that the Gain Expo settings are set individually for each C/N/S setting, right?

 

[Rchawks]

Also it seems with the start of each new flight it reverts to normal mode setting on takeoff reguardless of the switch setting you’re in when . After takeoff move the switch to C/N/S setting for it to kick in. I find this kind of strange but I believe that’s how it works. Some of the DJI software seems to have a odd approach.
As mentioned you do change the gain Expo in the settings at first which has nothing to do with the buttons on the transmitter face until after the fact.

 

[akdrone]

Also it seems with the start of each new flight it reverts to normal mode setting on takeoff reguardless of the switch setting you’re in when . After takeoff move the switch to C/N/S setting for it to kick in. I find this kind of strange but I believe that’s how it works. Some of the DJI software seems to have a odd approach.
As mentioned you do change the gain Expo in the settings at first which has nothing to do with the buttons on the transmitter face until after the fact.

Exactly correct - Each flight reverts to Normal mode regardless of where the slider on the RC is set to. If you were flying in cine on the last flight the slider may still be in cine but you will launch in Normal mode. The GainExpo settings will be set for Normal until you change to cine or whatever. So to get to Cine if you were in cine the last flight you have to move to N and then back to cine. That's just how it is.