Screws used in the gimbal, sizes?

[Seattledroneguy]

So I got the mavic used, took apart the gimbal and they where not all the right ones. I got my cables finally and need to know the lengths of the screws and if they are all the same threading

 

[dirkclod]

I'm not seen a list of those screws but @Thunderdrones might be able to tell you .

 

[JeepDSL]

Here are the gimbal screw:

• The ten short screws attach the cable covers. Putting calipers to them, I believe they are M1x3.00, #00 Phillips head.
• The two longer ones just below the tweezers are for attaching the camera. They measure out as M1x3.75, #00 Phillips head.
• The two larger screws attach the gimbal to the vibration damping board.

Hope that helps.

 

[Seattledroneguy]

You rock! Im going to build it with my parts, if still overload, I'm going buy the gimbal arm with ribbon cable already installed for 56 bucks. Feel so better at finding just the gimbal no camera for cheap.

 

[dirkclod]

Good luck and let us know how it turns out .