Signal strange of 5.8 GHz in Europe

[00raq00]

I've tested my mini 2 5.8 ghz and it is not working properly (when i'm few centimeters from drone i have 2 or 1 bar signal with 5.8, i'm live in europe) i have the newest firmware version 1.06.02 in drone and RC and dji app 1.9.
My drone's serial number starts from 3 (gen1) not from 5 (gen2)
I'm confused about that because it is quite brand new (5 flights) drone. Anyone in Europe has normal signal strength of 5.8 GHz (so mine may be a hardware issue not software)

On DJI forum i saw that problem with 5.8 GHz could be caused by 1.03.00 firmware (first post that i found is, after update to 1.03.00 5.8 GHz stopped working properly...)

 

[mavicmodx]

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[00raq00]

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

It os not related only to limit by CE region. I know that this exists but signal strength of 5.8 s too low (below my video that i sent to DJI support. On DJI forum you can find many posts about broken 5.8 GHz in mini 2 :⁠-⁠(

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[mavicmodx]

It os not related only to limit by CE region. I know that this exists but signal strength of 5.8 s too low (below my video that i sent to DJI support. On DJI forum you can find many posts about broken 5.8 GHz in mini 2 :⁠-⁠(

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

can you test the signal between the drone and the phone without using the controller?

 

[00raq00]

can you test the signal between the drone and the phone without using the controller?

When i set quick transfer it works fine (mini 2 creates 5ghz wifi)

 

[mavicmodx]

When i set quick transfer it works fine (mini 2 creates 5ghz wifi)

which version is the controller ?

 

[00raq00]

which version is the controller ?

Standard from fly more combo (DJI RC N1). If you ask about firmware version 04.11.02

 

[mavicmodx]

Standard from fly more combo (DJI RC N1). If you ask about firmware version 04.11.02

try different firmware version

 

[00raq00]

try different firmware version

Unfortunately not possible

 

[ghvsoftarts]

I've tested my mini 2 5.8 ghz and it is not working properly (when i'm few centimeters from drone i have 2 or 1 bar signal with 5.8, i'm live in europe) i have the newest firmware version 1.06.02 in drone and RC and dji app 1.9.
My drone's serial number starts from 3 (gen1) not from 5 (gen2)
I'm confused about that because it is quite brand new (5 flights) drone. Anyone in Europe has normal signal strength of 5.8 GHz (so mine may be a hardware issue not software)

On DJI forum i saw that problem with 5.8 GHz could be caused by 1.03.00 firmware (first post that i found is, after update to 1.03.00 5.8 GHz stopped working properly...)

Hello 00raq00, Did you find any solution to this problem?
I'm facing the same problem here in Brazil.

I bought my Mini 2 in november last in my trip to Canada but now I´m in Brazil and everythig was working great with the firmware 01.06.0000 until last week when I update to the firmware 01.06.0200 and RC 04.11.0200.
If you have some news about that, please share.

 

[00raq00]

Hello 00raq00, Did you find any solution to this problem?
I'm facing the same problem here in Brazil.

I bought my Mini 2 in november last in my trip to Canada but now I´m in Brazil and everythig was working great with the firmware 01.06.0000 until last week when I update to the firmware 01.06.0200 and RC 04.11.0200.
If you have some news about that, please share.

I was talking to DJI support and i sent them logs from aircraft. Unfortunately they ask to send drone and remote controller to DJI service. It should be delivered tomorrow, so i hope that they will solve issue. I will update this thread if they replace mainboard, downgrade firmware etc

Edit: you have rev 1 of mini 2 (serial number 3xxxx not 5xxxx) right?

 

[ghvsoftarts]

I was talking to DJI support and i sent them logs from aircraft. Unfortunately they ask to send drone and remote controller to DJI service. It should be delivered tomorrow, so i hope that they will solve issue. I will update this thread if they replace mainboard, downgrade firmware etc

Edit: you have rev 1 of mini 2 (serial number 3xxxx not 5xxxx) right?

OK thank you for the reply.

Yes I have the rev 1 MINI 2. ( Serial 3xxx)

 

[00raq00]

OK thank you for the reply.

Yes I have the rev 1 MINI 2. ( Serial 3xxx)

It's strange because I cannot see any rev 2 (serial 5xxxx) with this issue on DJI forum...

 

[ghvsoftarts]

It's strange because I cannot see any rev 2 (serial 5xxxx) with this issue on DJI forum...

Yes, I agree with you. It's also that.
I already searched about that in DJI forum and only owners of the REV 1 drones are reporting this issue.
Today I openned a support case in DJI Brazil and the attendent told me that has others support cases similar to our case.
I can hope for the best.
I will update this thread too ASAP with the final story.
Tks.

 

[00raq00]

DJI service fixed my mini 2, now 5.8 GHz is working fine. More details i put on DJI forum:

DJI Mini 2 5.8 GHz don't work after update

DJI Mini 2 5.8 GHz don't work after update

forum.dji.com