Solid Red Lights

mqmitch · May 13, 2019

Battery died and after changed I could not connect. Drone had solid red lights. Mavic 2 Pro

Mossiback · May 13, 2019

Try charging the first battery and see if it works. The issue may be with the second battery.

mqmitch · May 16, 2019

Tried all batteries. The funny thing is it worked and then I tried a few days later same thing. I’m back stateside and having issues again

mqmitch · Jun 16, 2019

This is horrible. Still having issues. Its weird because some days no problems and other days constant issues and cannot fly.

dtp · Jun 16, 2019

Sorry your having the issue, perhaps more technically minded people on the forum can help.

The manual just states 'Red Solid - Critical error'

mqmitch said:
This is horrible. Still having issues. Its weird because some days no problems and other days constant issues and cannot fly.

ff22 · Jun 16, 2019

mqmitch said:
This is horrible. Still having issues. Its weird because some days no problems and other days constant issues and cannot fly.

Still under warranty probably. Contact DJI support and open a ticket with them. How old is it?

Thomas B · Jun 17, 2019

The solid red lights indicate a “critical error” per page 14 of the online full manual.
See the image below.
I would not attempt anything until speaking with DJI. May just be a software glitch, but could be a loose wire, etc. if it occurs in flight you could have a big problem.

paulatkin73 · Jun 17, 2019

also, see this thread:

Mavic 2 Zoom - FW Update Failure - Bricked!

it may or may not be the same issue. but, as stated above - at this point you need to deal with the dji support.

cleanairdom · Jun 4, 2020

My Mavic Pro gives me a solid red rear light after blinking 3 times yellow and green, also the controller says "SYS WARNING CHECK APP"
The RC also wont spin the props so i am grounded.

i have updated, reset, and still nothing. trying to link the RC to the AC, it says - CHECK FREQUENCY SETTINGS

Please advice