- Joined
- Oct 12, 2016
- Messages
- 482
- Reactions
- 194
- Age
- 58
I had purchased a Getter Back for the P3A and I've been trying to figure out a place to attach it on the Mavic. On the arms there is very little clearance between the arm and the spinning blade. So little that I don't trust the velcro. I decided to attach to the tabs on the bottom and this is not a good idea....
The sensor was picking up on "something" there and when I was in flight and descending I would get an announcement from the app that it was landing. At one point it was even dropping altitude by itself. I was hovering at 80' and by itself it came down to 60'. Once I took the Getter Back off it was absolutely normal. So.. this is not a good place to put this handy item. Any others successful with this?
BTW - the Taco ND filters are awesome!! Absolutely no jello issues and no washed out video or pics.
The sensor was picking up on "something" there and when I was in flight and descending I would get an announcement from the app that it was landing. At one point it was even dropping altitude by itself. I was hovering at 80' and by itself it came down to 60'. Once I took the Getter Back off it was absolutely normal. So.. this is not a good place to put this handy item. Any others successful with this?
BTW - the Taco ND filters are awesome!! Absolutely no jello issues and no washed out video or pics.