weird gimbal movement

[abdu_mka]

Hi All,
a couple of days ago I experienced weird gimbal movement, I have PolarPro 64ND filter on the camera and it has never been an issue.
can someone please take a look at the video and let me know if there is anything I should worry about.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[Deleted member 103366]

FPV and the drone getting a real buffeting perhaps?

 

[abdu_mka]

FPV and the drone getting a real buffeting perhaps?

No not FPV. and it wasn't windy at all.

 

[CrazyFastFlying]

The gimbal was probably over loaded by the filter. I've heard of this happening before.

Or you could have installed it wrong.

 

[copterbob]

I would download and review the logs. See if the gimbal was over heating.

 

[lannes]

Hi All,
a couple of days ago I experienced weird gimbal movement, I have PolarPro 64ND filter on the camera and it has never been an issue.
can someone please take a look at the video and let me know if there is anything I should worry about.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

Easy way to narrow it down, take the filter off and see if you have the same vibration when flying

 

[Davros007]

Check too that the vibration plate is not hooked up somehow. It can jump out of place. Should be hanging properly and feel “loose”. You could accidentally do this when installing a filter, or it can happen in an accident/strong wind buffet/unpacking etc.

 

[Dave Maine]

There is something clearly wrong. It looks like a mechanical problem in the gimbal assembly. As previously suggested, take the filter off, and retest. Then check the gimbal assembly itself for free movement and constrictions.