Wet Mavic can not connect

[gusri.candra]

Hi Pilot,

I have just submerged my mavic into water. Now it can not connect to RC, even after I tried to link them.
Is it serious..? Which part need to be replaced..?

Thank,

 

[Flawless]

Is... is it still wet?

 

[Anthony Viscomi]

Ugh...you should have never powered it up while it was wet

 

[Cyberpower678]

Hi Pilot,

I have just submerged my mavic into water. Now it can not connect to RC, even after I tried to link them.
Is it serious..? Which part need to be replaced..?

Thank,

Please do not tell me you powered it on while wet. If you did you probably fried the receiver or the main logic board. @Thunderdrones can quote you on that.

 

[gusri.candra]

Oooohhh Lord...!! I power it up. Any idea how much the main logic board.??

 

[Anthony Viscomi]

Oooohhh Lord...!! I power it up. Any idea how much the main logic board.??

Maybe @Thunderdrones can assist with this question. Sit tight, I'm sure he will reply.

 

[Cyberpower678]

Oooohhh Lord...!! I power it up. Any idea how much the main logic board.??

In the meantime, bath it in rice and let it dry. If you were lucky you only shorted signal pads which fix themselves once dry.

 

[gusri.candra]

In the meantime, bath it in rice and let it dry. If you were lucky you only shorted signal pads which fix themselves once dry.

I have dried it in the rice for 3 days. I tested and not connected after this drying process. It's only the remote that can not connect. The gimbal still responding when I move aircraft by hand, as well as all light indicator works well.

 

[Cyberpower678]

I have dried it in the rice for 3 days. I tested and not connected after this drying process. It's only the remote that can not connect. The gimbal still responding when I move aircraft by hand, as well as all light indicator works well.

Have you checked if the WiFi switch is set to RC or Wifi?

 

[gusri.candra]

Have you checked if the WiFi switch is set to RC or Wifi?

It was on RC. I also have tested on wifi with same issue (not connected).
I tested to link the RC also didn't work.

 

[Cyberpower678]

It was on RC. I also have tested on wifi with same issue (not connected).
I tested to link the RC also didn't work.

@Thunderdrones it sounds like the RX is bad. Can you quote him?

 

[Former Member]

It is probably the core board. They dont like getting wet. You should try sending it in to DJI and see what they can do. Are you in the USA?