As the cell voltages all are above 3,9v (with a minimal cell deviation) when the BMS jumps from 72% to 0% 7min 10,6sec into the flight I would suspect a communication cut off between drone & battery.
Have you visually inspected the connectors...
I fully charged my Mavic 2 Pro battery to 100% and am attempting to take off. When the battery reaches 70%, the remote controller monitor suddenly displays 0% and the drone attempts to land.
However, the battery capacity is over 3.8V, and the...
Mavic 2 Pro 배터리를 100%까지 완전히 충전한 후 이륙하려고 하는데, 배터리가 70%에 도달했을 때 조종기 모니터에 갑자기 배터리 용량이 0%로 표시되고 드론이 착륙을 시도합니다.
하지만 배터리 용량은 3.8V가 넘고, 셀 전압은 정상입니다.
CP2112 통신 커넥터 사용법은 알고 있는데, 어떤 부분을 수정해야 할까요?
항공 데이터에서 볼 수 있듯이 배터리 용량은 0%로 유지되지만 셀 전압은 정상적으로 유지됩니다...