Mavic air 2 switch to FCC mode using an android app

[00raq00]

How i can download apk please . . .

2.9 MB file on MEGA

mega.nz

 

[eclipsek]

Here is a mirror in case the other mirrors go down: mavicair2fcc_com.gal.mavicair2fcc.apk

 

[Infide1]

Probably too soon, but has anyone updated air2s to the new firmware v.02.04.2700 (C1 certification) and checked if the FCC mode app still works?

 

[brianmartinmiltonmansion]

Hello All,
I have created an android app which allows switching from CE to FCC mode .

APK is attached , usage (currently need to use bottom type C port for patch only):
1.connect mavic air 2 controller bottom type C cable to your android device , turn on the controller .
2.run my application and press the patch button .
3.change your phone usb connection to normal top one.
4.then open DJI fly app normally and you can obsereve the change in the transmission tab .
Link to the apk

Hey mate can you please upload the file again? Google Drive says: "Sorry, the file you have requested does not exist.

Make sure that you have the correct URL and the file exists."

 

[eclipsek]

Hey mate can you please upload the file again? Google Drive says: "Sorry, the file you have requested does not exist.

Make sure that you have the correct URL and the file exists."

I've done a reupload of it, read the last page

 

[Infide1]

Probably too soon, but has anyone updated air2s to the new firmware v.02.04.2700 (C1 certification) and checked if the FCC mode app still works?

Answering my own question, i updated to latest firmware (C1 certification) and the FCC app is still working

 

[eclipsek]

Answering my own question, i updated to latest firmware (C1 certification) and the FCC app is still working

It definitely makes the drone non-C1 compliant, but as long as you don't land in very hot water (water that forces competent authorities to look into your drone logs) you should be fine.

 

[Infide1]

It definitely makes the drone non-C1 compliant, but as long as you don't land in very hot water (water that forces competent authorities to look into your drone logs) you should be fine.

You are probably right, since the mod increases the transmission power, so you can get better range. So it basically makes the drone non CE compliant. But it does not affect the parameters that make the drone C1 in the first place (speed, max height, weight etc). Unless they measure the transmission power, there is no way to prove its not within C1 specs. In any case, i don't use the mod to extend the flight range but to have better connection in the same area i would normally fly. Some could say it improves safety because there is less chance of a communication loss which could lead to an accident.

 

[brianmartinmiltonmansion]

I've done a reupload of it, read the last page

Thank you mate I appreciate your efforts I have obtained the APK.

 

[Rui S]

2.9 MB file on MEGA

mega.nz

Sorry to bother but is this the correct file for the DJI mini 2 SE (Firmware 01.00.0410)?
Thanks.

 

[brianmartinmiltonmansion]

Sorry to bother but is this the correct file for the DJI mini 2 SE?
Thanks.

Yes it is. I also have a DJI mini 2 SE and it works on this.

 

[Rui S]

Yes it is. I also have a DJI mini 2 SE and it works on this.

Thank you very much for your reply.

Even for the latest Firmware 01.00.0410?

Is there any disadvantages in comparison with the ones we have to purchase?

Thanks.

PS: I made myself brave and installed it after writing my message above
It seems to be ok and I will test it out as soon as possible.

 

[brianmartinmiltonmansion]

Sorry to bother but is this the correct file for the DJI mini 2 SE?
Thanks.

Thank you very much for your reply.

Even for the latest Firmware 01.00.0410?

Is there any disadvantages in comparison with the ones we have to purchase?

Thanks.

PS: I made myself brave and installed it after writing my message above
It seems to be ok and I will test it out as soon as possible.

Yes I have the latest firmware and this hack worked just fine, I increased my range significantly (I estimate at least 30% more). The ones you have to buy will eliminate the no fly zones and the altitude limit but if you go screwing around by flying higher than you're allowed to or where you're not supposed to be then you will get in the s*** big time if you get caught or worse still manage to down a light airplane with your craft, so I wouldn't go that way if I were you (but extra range is fine) .

 

[Rui S]

Yes I have the latest firmware and this hack worked just fine, I increased my range significantly (I estimate at least 30% more). The ones you have to buy will eliminate the no fly zones and the altitude limit but if you go screwing around by flying higher than you're allowed to or where you're not supposed to be then you will get in the s*** big time if you get caught or worse still manage to down a light airplane with your craft, so I wouldn't go that way if I were you (but extra range is fine) .

Thank you for the clarification. My intention is really just having a more reliable connection and a better range. I don't want to fly above the limits nor making anything dangerous.

I have one question though: it seems to be working, except for one detail - If I want the drone on FCC mode, I have to use the patch every time I switch the drone on. After switching off, the next time I switch it on it goes back to CE mode.

Does it happen to you as well? Or did I do anything wrong?

Thanks.