Hi. I recently upgraded to 1000 firmware. I'm unhappy with this new update and which to downgrade to 700. What in your opinions are the best software to use in order to achieve the downgrade without bricking Mavic.
You have to use the latest version of DUMLDore (Windows). Or DroneZBreak (macOS): GitHub - mavicBreak/DroneZBreak: Change DJI drones flight controller parameters and flash firmwares natively on OSX
Check www.youtube.com/user/digdat0 for a guide and some important safety procedures for DUMLDore.
Make d4mn sure you download the correct firmware file for your drone or RC. You don't want to accidentally flash the wrong firmware to your Mavic (some guy flashed Phantom 4 firmware to his Phantom 4 Pro drone and bricked it).
DUMLDore/DroneZBreak will not tell you that you picked the wrong firmware for your drone.
Great. Thanks. I’ll give it a try tomorrow
Can you roll back from 1000? I read many were having issues going from 1000 to 700 for example wheras going from 900 back was fine?
I'll be using the MAC version. Do i have to downgrade the RC as well ?Yes you can, but you will need to use DUMLDore (Windows) or DroneZBreak (macOS) because DJI has taken the .700 and older firmwares off of their servers.
Take a look at this guide: How to rollback Mavic firmware
You don't have to apparently but it might better to have matching firmwares.I'll be using the MAC version. Do i have to downgrade the RC as well ?
Thanks i'll try. I guess i can always reset to factory settings in assistant 2 if something goes wrong in the processYou don't have to apparently but it might better to have matching firmwares.
I downgrade the RC to .700 without a problem!
I'll be using the MAC version. Do i have to downgrade the RC as well ?
Haven't managed to get the Mac software to work. Used DUMLdore on an old Windows laptop I had lying around.I'll be using the MAC version. Do i have to downgrade the RC as well ?
This isn't good advice to give, connection may come and go several times during the update.Instead, see if your RC can connect to the drone. If it can, it means the update is finished. If it cannot, it means the update is still going.
Can you roll back from 1000? I read many were having issues going from 1000 to 700 for example wheras going from 900 back was fine?
What exactly were you having issue with the current firmware?I decided not to go on with it as it might void my warranty. You never know with DJI. I’ll have to wait for another update and hope it fixes this issue
What exactly were you having issue with the current firmware?