DIY Remote ID Module?

[Hawkwind]

Is it possible to DIY a compliant Remote ID module? I have a kit that I built for another project, but it has everything hardware-wise to transmit RID via WiFI, just needs the code. From what I've seen so far, it seems there are no provisions for a person to create their own...

Federal Register :: Request Access

Thoughts?

 

[msinger]

It should be possible since other companies managed to get their devices listed here. That climb might not be worth the view though unless you're planning on selling your module.

 

[mavic3usa]

Good place to start: Federal Register :: Request Access

13. Can I make my own Means of Compliance (MOC)?Yes, although the process is technical and to date the FAA has only accepted a singleRID MOC developed by ASTM (ASTM-F3586-22). In most scenarios, compliance withthe FAA-accepted ASTM standard will be less burdensome than attempting to develop aunique MOC. To submit a RID MOC, contact the FAA at [email protected].

 

[Cafguy]

That climb might not be worth the view

I would say this is the best answer to your question.

 

[Donald Hill]

You would need to get your module listed on the Declaration of Compliance list. (UAS Declaration of Compliance)
That has to be the most expensive way to get a RID module.

 

[Hawkwind]

You would need to get your module listed on the Declaration of Compliance list. (UAS Declaration of Compliance)
That has to be the most expensive way to get a RID module.

Yep.