So I am looking at purchasing used Mavic 2 pro. This issues is this- green light is on both controller and drone. 1st. Page says connected, but when tapping on the "go fly", that page says disconnected. I suspect there might be a firmware incompatibility issue. Unfortunately I cannot run the Dji assistant 2 program due to the batteries are below 50%. So my plan is to try again with one if my fresh batteries. In the event is doesn't help is there anything else I can try?
I tried rebinding it and it will run out of time without binding.
I tried different cables, the standard one that connects to the top of the controller to the phone. Tried the bottom USB port with the top USB port disconnected. Tried android and iPhone devices. All are a no go. Any help would be greatly appreciated.
I tried rebinding it and it will run out of time without binding.
I tried different cables, the standard one that connects to the top of the controller to the phone. Tried the bottom USB port with the top USB port disconnected. Tried android and iPhone devices. All are a no go. Any help would be greatly appreciated.