some guy doing an FCC hack permanent for RC pro Controller

[albertino78]

There is not a screenshot showing “patched” or “fcc hack applied” only the windows cmd prompt (I have not these screenshot) that says “all done patch applied” and the rc reboot itself.

You have to trust me…. .0600 patched.

 

[fischli]

Make a shot like there:

some guy doing an FCC hack permanent for RC pro Controller

Did anyone update to 0500 using the remotes update process rather than the DJI assistant? With the patch still working yes, it's what i did. i was on 0100. i re-installed the latest patch on the 0100 (to be sure), i updated via remote to the latest 0500 and patched again then.

mavicpilots.com

 

[schip589]

HELP !!!!!!!
Is there a way to solved my big problem. ?????????????????
I lose the FCC by the upgrade. Did not know the new issue by upgrading tot .500 !

 

[DAFlys]

There is not a screenshot showing “patched” or “fcc hack applied” only the windows cmd prompt (I have not these screenshot) that says “all done patch applied” and the rc reboot itself.

You have to trust me…. .0600 patched.

A screenshot of the transmission graph would prove the patch was applied but I wouldn’t waste your time.

 

[Hatem]

Can you install a third-party app?

If the answer is yes.

Install the file manager

Drag a backup for the Dji fly app

Then delete the application

And reinstall without opening

Then do the correction

 

[schip589]

Can you install a third-party app?

If the answer is yes.

Install the file manager

Drag a backup for the Dji fly app

Then delete the application

And reinstall without opening

Then do the correction

Hatam, Tnks, no it is de DJI RC controller.
no third-party app.

 

[DAFlys]

Hatam, Tnks, no it is de DJI RC controller.
no third-party app.

You can install 3rd party apps. Use adb control app from your computer to install the apps. You also need a launcher. The S9 Samsung launcher works quite well and the Apk is easy to find.

 

[herasymcuk]

You can install 3rd party apps. Use adb control app from your computer to install the apps. You also need a launcher. The S9 Samsung launcher works quite well and the Apk is easy to find.

Yes, just remember: 32 bit app only

 

[albertino78]

A screenshot of the transmission graph would prove the patch was applied but I wouldn’t waste your time.

Here you are you can also view the firmware version




and ce mode

 

[schip589]

You can install 3rd party apps. Use adb control app from your computer to install the apps. You also need a launcher. The S9 Samsung launcher works quite well and the Apk is easy to find.

so far i am, but now my knowledge stopped.

>> adb devices -l
List of devices attached
5HAZK6P001980E unauthorized transport_id:1

 

[iaTa]

You can install 3rd party apps. Use adb control app from your computer to install the apps. You also need a launcher. The S9 Samsung launcher works quite well and the Apk is easy to find.

On this note, do you know if anyone has tried adb updating the DJI Fly app with the latest APK on the RC controller?

E.g. right now the RC is running v1.11.4 and the latest available is v1.12.2.

 

[Hatem]

On this note, do you know if anyone has tried adb updating the DJI Fly app with the latest APK on the RC controller?

E.g. right now the RC is running v1.11.4 and the latest available is v1.12.2.

Yes, I tried all the roads are a failure.

 

[schip589]

Can you install a third-party app?

If the answer is yes.

Install the file manager

Drag a backup for the Dji fly app

Then delete the application

And reinstall without opening

Then do the correction

Hatam, Tnks, no it is de DJI RC controller.
no third-party app.

YES i DID.
see this result so far:

so far i am, but now my knowledge stopped.
My computer windows 11 .

>> adb devices -l
List of devices attached
5HAZK6P001980E unauthorized transport_id:1

but now wthat tot do ???
Could you advice me please ?

 

[fischli]

Firmware Update failed for me... :-(

 

[albertino78]

Firmware Update failed for me... :-(

What firmware? How did you tried? FCC patch already installed?

 

[fischli]

I come from .0500 --> Install FCC-Patch again --> Update via DJI Assistant 2 --> Update Error!
I tried second time --> now Im on .0600 - but I have to wait the cool down than I try the FCC-Patch again.

Hope the best I dont loose FCC.

 

[albertino78]

If you were on .500 patched and you reapplied the patch before trying to update….. maybe you can try to repatch in about 2 hours successfully ….. finger crossed

 

[fischli]

I also think that it is not necessary to install the patch again beforehand. But you basically only have one try. So it's better to do this and wait 2 hours.

Update: FW = .0600 and FCC = active... good luck at the others

 

[scoopdreams]

Followed the instructions and updated from 1.02.0200 to 1.03.0600. FCC is active still.

 

[DAFlys]

so far i am, but now my knowledge stopped.

>> adb devices -l
List of devices attached
5HAZK6P001980E unauthorized transport_id:1

You’re not running the 1.4 patch as that makes adb authorised permanently.