Recent content by DiyTechno

You can calibrate the gimbal using this tools. https://github.com/o-gs/dji-firmware-tools

Try follow this tutorial but change "spark" with WM160

Just buy new gimbal and change it. But dont buy complete gimbal set, just buy and change the gimbal and use your oldcamera module in previous gimbal. If you change with new camera module, it will require you to pair new camera to your main board and only dji can pair it. Here is the link to buy...

Definitely your camera cable has broken. If you change new cable, it will solve all camera and vision related issue. What happend to old mainboard till you decide to change with new mainboard? Do you have micro soldering experience?

I'm not sure what cause that. I have two mavic mini and i try to swap defective mainboard to other which doesn't have imu problem, try to recalibrate IMU and yet still failed. That's how i confirm its from mainboard.

Your mainboard is the culprit. I know because I have exactly same problem. Unfortunately i have to change the mainboard to solve the problem and this will also cause another issue, "gimbal imu data incompatible". Like it or not, i have to stick to this minor gimbal error, at least my drone can...

Fail calibrating IMU because the main board fail on heating the IMU chip (MP6500). When you do calibration, it will blink yellow then turn to solid red which this solid red mean it try to heat up the IMU to 60°C and when it reach 60°C the percentage will show 94%. Your main problem is the...

I've change flat ribbon cable in my MM and it is fine. No error at all. It is not true that gimbal and ribbon are sold as pair. MM gimbal has serial number. I'm not sure where the serial number is stored, wether in camera module or on the pcb that inside the gimbal casing which very difficult...

My car ask me to change engine oil and I ignore that. LOL

Thats great, and please note the temperature where you store your batteries as temperature play a role in that

Yup, totally agree with you in this. People can have their own opinion and preference. I just share the fact based on batteries manufacture manual.

IMHO maybe reason dji using INR batteries is because it is saver and has high drain current which can go up to 20A. Based on battery's manual, they tested it to overcharge the battery with 20A 20V for 3 hours and the battery is still ok. No fire

Samsung has various type of lithium battery. Do you know what model exactly that fitted on your electric bike? Lithium batteries has a lot of chemical variety which they have their own characteristic and purpose. Here is a link to explain some of that...

Mavic mini using battery cell from samsung. It is INR18650-25R. Based on battery's datasheet, it just can last for 250cycle and after that it's capacity will drop >1500mA. Dji recommend to discharge the batteries for long term storage based on that batteries manufacture. So just follow the...

You can try use certified Quallcomm quick charge 3.0 18W. This charger will communicate with dji charging hub, if the charger is compatible with QC 3.0 then it will increase charging voltage to 12V.