Recent content by Jean-Claude

Thanks very much for all your advices. You are perfectly right, I finally reconfigure my Mac pro with and old screen and reinstall assistant 2 and get it to run ok This is my first mavic pro 2, I also have a pro1 platinium and never add to face such situation, it was working fine with the 4k...

I am sorry to ask again for more help, I want to run the calibrate cession and I get only a white screen without the pattern. I am on mac, i tried divers screen definition but always get à white screen. thanks again.

Thanks a lot I got it. In fact I was running version 1.2.4 of Dgi assistant after installing version 2.0.14 the update ran fine.

Thanks for all your advices, I will proceed as Fizzbang recommend and let you know my progress.

Presently my mavic pro 2 firmware is version V01.00.0510 and I try to update to V01.00.0670 The upload and transmit sequence work fine but after 20 % running the update process I get error 0x028103 i retry several time with different usb cable and get the same issue. i also try using the...

Thanks bumper

Hello, Before buying a gimbal control board, I am wondering if it's any difference between the board for mavic 2 pro or mavic zoom? Thanks for your advice. Jean-Claude

Hello, I’am looking to troubleshoot a mavic 2 pro camera and need some help. I noticed that during initialization the camera does the pan well but not the roll and the tilt. What could be the cause? Thanks for your help. Regards Jean-Claude

Hello Tom I get exactly the same issue described on your video, did you fixed it and how ? Regards

Hello Starz Do you known which card is responsible fror sensor management ESC or the Mother board ?

After the crash I change the two backs legs, WiFi module and the plastic body Thanks for your concern

Thanks for your answer, I use a large mac screen and it works correctly when I calibrate other Mavic Pro or Mavic mini

In fact I get an optical sensor error in go4 an no distance showing this is why on a first step I replaced the sensor and the electronic card handling the sensor and the gimbal and video with good ones tested on an another Mavic Pro.

Hello, I get two Mavic pro and I am requested to calibrate the sensor of one of them. Unfortunately when I use Dji assistant 2 the application does not show the bleu marks as it usually does, the sensor and front hardware are new and checked, the firmware is up-todate. The drone itself flight...

Hello, I have a mavic pro that I fixed after a fall, I get it going and everything is working fine except the optical sensors. I changed them to new ones and could not make them functional; the firmware is the latest version all the other features work well and it flies perfectly. Does...