Recent content by sebastian.bilbao

Did you search k index and sat bloq. With uav forecast???

I'm testing now, denoiser 3, and it is really good, even better than neat video..

You should not calibrate compass, unless the mavic ask you. Please, don't do it each time you flight.

That is the part where I had to use neat video, because the ev was - 1.

Ambarella a9 is far better than the h12 of the mavic air. The a9 has dual core a9 arm processor, vs the h12 of mavic air with a single core a9. Both at 1000 mhz. The mavic problem with bitrate is only a software issue. If ambarella enables x265, the 60mbps of mavic, are enough.

I used neat video only for 5 seconds. All the other part, only with gc titan lut.

Since the both last fw, and with GO 4.20, the flicker problem is fixed. The requirements are: 1. The fastest u3 sd. You can buy the SanDisk extreme v30, is the best choice. 2. EV always 0 3. Dcinelike or none. 4. Nd8 or nd16 filter. 5. 4k 30 or 24 fps... 2.7k or 1080p doesn't work. 6. The most...

According to the user manual, what is the operating temp of they drone?

The camera blurry edge is a common issue. The loose rear legs too. Finally, the compass can fail with the gimbal movement

35 years here, phantom 3 std and mavic owner..

Occusync use the same frecuency and channel selection as WiFi.. And the same hardware... It is WiFi with another name..

If mavic fails, the behavior is the same as a cheap drone. If the imu fails, or the barometer, or any other important system, you will need the experience, to Know how to fly with any help, only looking the drone. The problem of dji, is the excessive assistance. That make pilots too confident...

Mavic uses an exmor r imx377. Is the same of nexus 6p xiaomi yi 4k and 4k+, and maybe mavic air. The 377 is capable of 4k60 but sadly in the mavic the software only allows 30fps. In the xi 4k+, has 135 mbps of bitrate and according to the info delivered by sony, the 60mbps of mavic, are a sw...

Is a common issue, you can buy a new camera barrel, or ask dji for warranty. You can look in Google for "mavic blurry issue"

4.1.15 : 0, is 4.1.22 +1 Noise filter is disabled at +2 now. To record landscapes and high altirude, you should use +1 to avoid noise. To record close objects, 0 is the Best setting. If you use neat video, +1 is the best. Trees and grass are a true nightmare to neat video. Sorry for my...