Recent content by StefanG

Glad you found it informative. :) Yes, with RTK you need to have a "base" (RTK terminology) station. This is transmitting "correction data", i.e. it sends all data it can see to the "rover". The "rover" (in RTK terminology) is the moving antenna and does the calculations to get RTK fix. The...

For info, you need to have RTK (real-time kinematics) if you want to have a better position while flying, i.e. that the drone can use to correct its position while flying. PPK (post-process kinematics) is used to "post-process" the position, i.e. you fly and then you can use other sources of...

Might have to do with 100F...I (as a Swede using Celcius degrees, Anders Celsius - Wikipedia) have learned that 100F is the normal (roughly) body temperature, hence why the doctors might prefer it, and also how I can remember how much it is. Anyhow, entertaining discussion in this thread. :)

Check here: Dronelink Seems like USD100/year for the minimum version where you can fly the missions.

@Endeavor: Slow (or bad) memory card that causes a lag when writing to it? Try using the internal flash and see if it is better. I also have an M2Z (previous M1P owner) and I have no such issues like you have.

Hi, I have downloaded the Dronlink app through the web-page link. Shows as 1.0.0.33 on Android. When I start it, I can login and see the missions I have made etc. This works nicely when I have not connected the remote controller. However, if I plug in the remote (for a MP1), the standard USB...

For your info, I have the same issues on a Pixel 3 /Android 9 as well as a Huawei Mediapad M5 / Android 9. Other than that, the mission player is great! Going to be interesting to compare the preview with the actual flight later on.

I ended up with 605. Almost standard, works for all other stuff and the map is almost correct... :)

Have the same issue. Check this thread: DJI Go4 4.2.8 (Android) - Tablet mode minimap wrong place?

Impressive! After reading through your text I tend to agree with you...sadly enough it seems to be genuine. Thanks for the report!

Thank you! May I ask what version of FW you are using?

A small follow up on this. I did a re-flash of firmware in goggles, reset settings and changed to my dedicated (Huawei Medipad M5) android device. Flew today without any issues at all. Confidence in Mavic is getting higher...but still lower than before. I also flew with "smooth" (720p60fps)...

I will keep an eye out for the reported FW. I just did a "bench test" (without props and no flying) to see if something got overheated or not. At this time I also did a reset on all settings. Then, the question on what type of stream (i.e. the HD setting came up). This time I selected "smooth"...

@KeithLa, Thank you! I will read through your story more in detail. I scanned through it now and the problem I have is that everything worked perfectly 2 days ago...the only difference is my new set of goggles, hence I still suspect that it has to do with this. Maybe the RC has to "work harder"...

Ah, ok. No I did not use the advanced menu. I Will redo it just in case.