Anyway to change camera pitch while in waypoint 2 flight mode

[Artisticpicture]

Hi, I am new to Mavic 2 Pro. When I change the camera pitch during Waypoint 2 flight, the gimbal will try to go back to horizontal position as soon as you release the dial. Is there a way to change it? Often the default angle is not desirable. Thank you!

 

[Starz]

I’m thinking there are two fly modes in waypoint. Switch the flight mode.
(don’t have mine in front of me right now, or I could be more specific)

 

[Artisticpicture]

I’m thinking there are two fly modes in waypoint. Switch the flight mode.
(don’t have mine in front of me right now, or I could be more specific)

Thank you! Ok, I will try the old method. This requires the drone to be at the location and set by C1 button. I would be nice the set the waypoint route offline and be ready to flight on site. Anafi's flight plan is way better in this aspect.

 

[Artisticpicture]

I think I know part of problem is that I have not set any POI, so the camera will just look at horizontally. Have to use an POI to set the camera angle.