- Joined
- May 13, 2017
- Messages
- 630
- Reactions
- 256
Has anyone else had this issue, my autofocus won't ever focus clearly anymore. I always have to switch to manual focus to set it. When the Mavic was brand new I don't remember having this issue. I've done the gimbal alignment calibration thing several times but that didn't help me. Even redid the IMU calibration just for fun.
Now keep in mind... I'm on 700 firmware and have modded some parameters on the bird, but I don't see how any of that has any effect on the camera not autofocusing properly. I did on one occasion have a hard landing in grass (critical battery low voltage cut off made it drop from the sky but only about 3 feet up). But I don't recall the camera issue happening right after that happened. Is there any easy fix for this besides replacing it? I can deal with manual focus rather than pay for a new camera.
Now keep in mind... I'm on 700 firmware and have modded some parameters on the bird, but I don't see how any of that has any effect on the camera not autofocusing properly. I did on one occasion have a hard landing in grass (critical battery low voltage cut off made it drop from the sky but only about 3 feet up). But I don't recall the camera issue happening right after that happened. Is there any easy fix for this besides replacing it? I can deal with manual focus rather than pay for a new camera.
Last edited:
