Beeping RC

[Oman]

My dji air 2s RC IS BEEPING AND WILL NOT stop,
Thanks oman

 

[Tufargon]

Re calibrating the RC usually fixes it. Don't forget the roller when re calibrating at the end.

 

[Oman]

Re calibrating the RC usually fixes it. Don't forget the roller when re calibrating at the end.

Thanks what roller do you mean
Oman

 

[Oman]

My dji air 2s RC IS BEEPING AND WILL NOT stop,

 

[Tufargon]

Thanks what roller do you mean
Oman

The roller for your zoom and gimbal up and down at the top left.

 

[Oman]

The roller for your zoom and gimbal up and down at the top left.

Thanks I will give that a try, and let you know

 

[Tufargon]

Thanks I will give that a try, and let you know

It's the final step of the calibration. I'm sure it will work.

 

[eEridani]

The drone has anti-collision sensors, and anything near the front, back, and above the drone will cause the controller to beep continuously.

The only way to silence the noise is to set the controller volume to ZERO. But probably not a great idea.

Get the drone outside, 15 feet away from things, and the red radar dash and orange obstacle warning on the screen should go away.

 

[Oman]

The drone has anti-collision sensors, and anything near the front, back, and above the drone will cause the controller to beep continuously.

The only way to silence the noise is to set the controller volume to ZERO. But probably not a great idea.

Get the drone outside, 15 feet away from things, and the red radar dash and orange obstacle warning on the screen should go away.

I will give it a try
Thanks Doug

 

[eEridani]

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[MavicAir2Marc]

I turn on the controller first and it will sometimes start that beeping. I turn off the controller, push both sticks up, down, left, and right then turn it back on and it doesn't beep any longer. If I had to guess, I leave my sticks in and if there's any pressure at all while being stored, I think that's what causes it to beep.

 

[Oman]

I turn on the controller first and it will sometimes start that beeping. I turn off the controller, push both sticks up, down, left, and right then turn it back on and it doesn't beep any longer. If I had to guess, I leave my sticks in and if there's any pressure at all while being stored, I think that's what causes it to beep.

Thank you oman

 

[Oman]

The drone has anti-collision sensors, and anything near the front, back, and above the drone will cause the controller to beep continuously.

The only way to silence the noise is to set the controller volume to ZERO. But probably not a great idea.

Get the drone outside, 15 feet away from things, and the red radar dash and orange obstacle warning on the screen should go away.

Thanks for your reply, here comes the stupid part, could this be caused by flying in my living room? Thanks Doug

 

[eEridani]

Yes.

 

[Oman]

Yes.

Thanks for you time Oman aka Doug

 

[msinger]

could this be caused by flying in my living room?

Are you saying the beeping only occurs when flying in an enclosed space like your living room?