Bioluminous Mavic Wall Mount. A hanger for your Mavic and controller! Another cool creation.

[Inspirephil]

My skin from Wrapgrade was easy to install. It took me about 2-3 hours. Just be sure to wipe off your drone with rubbing alcohol first to remove any oils or dirt before you start to install it. Also make sure you wash your hands thoroughly before you start.
If you look on YouTube there’s installation tutorials for all the different ones.

 

[Former Member]

Well the really sad thing is I have a 28 x 30 shop out back but half of that is filled with stuff from the pool that was just tossed in right before the hurricane last year and has yet been cleaned up. Which this weekend that is going to change.

I think pool stuff qualifies as a joint marital toy so she shouldnt really be infringing on your space. Give them an inch they take a mile.

 

[2nckayakers]

I think pool stuff qualifies as a joint marital toy so she shouldnt really be infringing on your space. Give them an inch they take a mile.

Nope pool was totally hers. I held off on a pool for years and she pulled the grandchild card, so we got a pool last year.

 

[Bella]

Good point. I think the hanger would be good for alot of guys like me who like to "grab it and go" especially with all this rain we have been getting. The minute that the raindrops stop, Im out flying.

I typically keep it in the hard case on the shelf and every time I took it out to fly I was delayed by the inevitable firmware update. Now I keep it hanging right next to my computer. When there's an update, it's easy to just plug it into the USB. And when I get back home after flying, it goes back on the mount to transfer files via USB instead of having to fiddle with the tiny, tiny SD card.

 

[Porky]

I would be concerned that my drone would collect too much dust while in the open. I like the protection of the drone case.

Your just scared of your wife

 

[Sitka78]

Its a hanger (sorry, not a hangar) and it's made by the same fellow who makes the laminated preflight checklists. It probably takes him 2 hours to make each one, so thats why the price is what it is, but I just thought it was a cool idea. I have seen countless people hanging their Phantoms, now you can hang your Mav. I have one coming in the mail and will let everyone know which drones it fits. The picture is of a Mavic 2, so the company is obviously thinking ahead. It looks like it will fit the MP and MPP.

Here's his website and a picture. The latest version will have a slip proof foam pad on the pedestal. My only recommendation is to use a level with bubble when mounting it to make sure the controller pedestal is horizontal to the ground:

Bioluminous Commercial Photography


View attachment 59185

No mention of price?? Almost afraid to ask.

 

[Bella]

No mention of price?? Almost afraid to ask.

Base is $19.95, short shelf $19.95 and long shelf is $29.95. Shipping included. You also get one of my laminated checklists free.

 

[Former Member]

No mention of price?? Almost afraid to ask.

Never be afraid to ask about price! This is moderately priced for as much work as it takes to make.

 

[Former Member]

Nope pool was totally hers. I held off on a pool for years and she pulled the grandchild card, so we got a pool last year.

She OWES you an Inspire with X7.

 

[2nckayakers]

She OWES you an Inspire with X7.

Oh I am totally with ya there! Especially since I was the pool boy too.

 

[Former Member]

Here's the product name and web page again:

Bioluminous Mavic Wall Hanger.

Bioluminous Commercial Photography

 

[Former Member]

Oh I am totally with ya there! Especially since I was the pool boy too.

Hey that could be a perk if you play your cards right. Wives love pool and cabana boys. Just tell her to call you by a Spanish sounding name and you two might have a good afternoon.

 

[Drone on]

I did ask if could take her “Rembrandt” painting down to hang my mavic in its place, all I can say, the 2nd word was OFF don’t know what her problem is.....

Man up! Fly through the Rembrandt. File the insurance claim, and use the proceeds as a down payment on the MP2

 

[Former Member]

Man up! Fly through the Rembrandt. File the insurance claim, and use the proceeds as a down payment on the MP2

I think a Rembrandt would be worth far more than an M2P. Probably get him an M2E! lol

 

[RayOZ]

If you store it without the gimbal lock in place, I guess there's the lightest of downward force on the rubber suspension, but we are talking grams, I don't think extended storage in any position would affect the rubber suspension - the gimbal assembly doesn't seem heavy enough to stretch it out.

I guess just make a note to hang with gimbal lock on. Yes, the camera and gimbal are only a few grams, but the rubber is design to hold that few grams. I was just wondering if having the rubber in tension for long periods might effect the elasticity. I assume it's designed to help dampen vibration during flight, so I figured it's better not to put load on it when it's not in use.

 

[Bella]

I don't think it would stretch out or lose elasticity. I think the rubber mount would last longer than the typical life of the drone.

 

[Porky]

Man up! Fly through the Rembrandt. File the insurance claim, and use the proceeds as a down payment on the MP2

You sure when I’m married to this....

if she said jump I would definitely say how high

 

[Former Member]

You sure when I’m married to this....View attachment 59335

if she said jump I would definitely say how high

Be still my heart...

 

[fozzzy]

I wonder if the wife will let me hang it on the wall in the lounge, think I know the answer to that one

Errr.... not so much lol

 

[Porky]

Errr.... not so much lol

Love my wife but her reaction to hanging my pride and joy on the wall,

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies