Can’t connect to the DJI Assistant 2 App

[ZooCougar]

So I got a message to calibrate the vision system. Up until now I have never needed to connect to the Assistant. I downloaded the latest version from the website and followed the instructions on a DJI video I found. I connect the drone to the computer and the computer detects it, but the Assistant does not. I just see the same picture of the USB going to the computer.

Anyone else had this issue?

 

[BD0G]

Yes. This is due to DJI not using a digitally signed driver that is trying to install which will allow DJI Assistant 2 connection.

Here is a thread from the DJI forum that you should investigate to help resolve the issue.

A digitally signed driver is required

 

[ZooCougar]

Yes. This is due to DJI not using a digitally signed driver that is trying to install which will allow DJI Assistant 2 connection.

Here is a thread from the DJI forum that you should investigate to help resolve the issue.

A digitally signed driver is required

Thanks. I’ll try it out. I did not get that error message however.

 

[Thomas B]

Likely due to a degree of Apple centricity by DJI. On a Mac you can force the system to open the file with a single click.

 

[ZooCougar]

Yes. This is due to DJI not using a digitally signed driver that is trying to install which will allow DJI Assistant 2 connection.

Here is a thread from the DJI forum that you should investigate to help resolve the issue.

A digitally signed driver is required

So I tried disabling the signed driver requirement. And reinstalled. Still no luck.

I followed this instruction.

Installing Arduino IDE - learn.sparkfun.com

 

[BD0G]

Was the process similar to this?

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

If not then use this method.

 

[ZooCougar]

Yes. This is due to DJI not using a digitally signed driver that is trying to install which will allow DJI Assistant 2 connection.

Here is a thread from the DJI forum that you should investigate to help resolve the issue.

A digitally signed driver is required

Nm. It works now. Thanks for the help.

 

[ZooCougar]

Was the process similar to this?

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

If not then use this method.

It looked like that but not the same screen. There was a pop up that came up in the app that I didn’t notice. I missed it after scanning. Good to go.

 

[ZooCougar]

Wow. So I guess if I ever travel with this thing, I better have a computer with me in case I have to calibrate the vision system. What else do I need this application for other than if my aircraft flies away or crashes and I need the data?

 

[BD0G]

Firmware updates that fail to complete using the DJIGO4 app can be carried out using DJI Assistant 2.

Good that you found the popup and were able to proceed.