Case and New Gimble Protector

[rexster1505]

Couple of days ago this case came in from PGYTECH. It's small enough for a good carryon, yet is pretty spacious inside as the layout is very good. It comes cut for the stock DJI controller and also the RC Pro controller. 3 battery slots, but can hold another battery under the controller. It's also cut in a way that I can put the RC Pro face down with the sticks mounted. I have a piece of closed cell foam between the battery and controller

 

[rawman001]

Did the gimble protector come with it? Is it easier to put on than the original one that came with the A2s?

 

[dirkclod]

Did the gimble protector come with it? Is it easier to put on than the original one that came with the A2s?

Thank you now I know where to put this thread

 

[rexster1505]

Did the gimble protector come with it? Is it easier to put on than the original one that came with the A2s?

No, it just happened to be delivered at the same time as the case..Far easier to me than the DJI one. It's a straight push on and a tight fit

 

[CorralesDan]

I use the same/similar gimbal protector and it's so much easier to use. It does a good job of protecting the whole front of the Air 2S.

 

[retiredNH]

I use the same/similar gimbal protector and it's so much easier to use. It does a good job of protecting the whole front of the Air 2S.

What protector? Can you give a link? I find the stock one the worst design feature by far of the 2S. I always fear doing damage to the gimbal when I put it on...

 

[CorralesDan]

What protector? Can you give a link? I find the stock one the worst design feature by far of the 2S. I always fear doing damage to the gimbal when I put it on...

This is the one I ordered from Amazon: https://smile.amazon.com/Gimbal-Pro...4766&sprefix=DJI+Air+2S+gimbal,aps,105&sr=8-4

 

[retiredNH]

This is the one I ordered from Amazon: https://smile.amazon.com/Gimbal-Protection-Dustproof-Protector-Accessory/dp/B09786HDP2/ref=sr_1_4?crid=1ZLSW1FHNPHLJ&keywords=dji+air+2s+gimbal+cover&qid=1651414766&sprefix=DJI+Air+2S+gimbal,aps,105&sr=8-4

thank you! Ordered today.

 

[rexster1505]

Same one I have. Works great, just don't press it on too hard

 

[PalmettoAerial]

Couple of days ago this case came in from PGYTECH. It's small enough for a good carryon, yet is pretty spacious inside as the layout is very good. It comes cut for the stock DJI controller and also the RC Pro controller. 3 battery slots, but can hold another battery under the controller. It's also cut in a way that I can put the RC Pro face down with the sticks mounted. I have a piece of closed cell foam between the battery and controller

Is it a semi rigid case? Better than the stock?

 

[rexster1505]

Is it a semi rigid case? Better than the stock?

Hard case.

 

[PalmettoAerial]

Hard case.

Do you have a link? I find it hard to find a cut out for the RC pro controller

 

[rexster1505]

Do you have a link? I find it hard to find a cut out for the RC pro controller

Safety Carrying Case For DJI Mavic Air 2 / DJI Air 2S

PGYTECH DJI AIR 2S / MAVIC AIR 2 SAFETY CARRYING CASE (STANDARD) Professional protection: sturdy & waterproof Efficient Storage Set-up The safety case can accommodate a DJI AIR 2S /MAVIC AIR 2 FLY MORE COMBO (capable of storing 4 batteries). It is also compatible with smart controller. It is...

www.pgytech.com

 

[PalmettoAerial]

Safety Carrying Case For DJI Mavic Air 2 / DJI Air 2S

PGYTECH DJI AIR 2S / MAVIC AIR 2 SAFETY CARRYING CASE (STANDARD) Professional protection: sturdy & waterproof Efficient Storage Set-up The safety case can accommodate a DJI AIR 2S /MAVIC AIR 2 FLY MORE COMBO (capable of storing 4 batteries). It is also compatible with smart controller. It is...

www.pgytech.com

Thanks!

I guess the disconnect has been (at least on my end) has been vendors using the term smart controller. I have found quite a few cases that I thought would be a good fit for my travel needs but have been sitting in the sidelines waiting on a case with foam suited for the RC pro.

Assuming you do have this case and have tested the RC pro’s compatibility

 

[PAW]

thank you! Ordered today.

Ditto... Thanks CorralesDan for the tip. Been looking for a better gimbal protector for some time. Wish they made one similar for the M2P.

 

[rexster1505]

Thanks!

I guess the disconnect has been (at least on my end) has been vendors using the term smart controller. I have found quite a few cases that I thought would be a good fit for my travel needs but have been sitting in the sidelines waiting on a case with foam suited for the RC pro.

Assuming you do have this case and have tested the RC pro’s compatibility

Well, that's my picture and containing the RC Pro. I put it in upside down as that way I don't have to remove the sticks

 

[eaglesurfing]

I got tired of covering the Gimbal and after hearing how many have damaged them by running into objects, I installed this one.

 

[rexster1505]

I got tired of covering the Gimbal and after hearing how many have damaged them by running into objects, I installed this one.
View attachment 148482

Couldn't use that on an Air 2S. Will you use that transporting it?

 

[eaglesurfing]

Couldn't use that on an Air 2S. Will you use that transporting it?

Yes. I put mine in a back pack and it travel well without the original guard. You can see that this backpack has adjustable compartments which makes it easy to adjust to the size of my drone. I did not like the hard cases because I wanted to carry more and have the option change things up.

https://smile.amazon.com/gp/product/B0777VQZPH/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

 

[PalmettoAerial]

Well, that's my picture and containing the RC Pro. I put it in upside down as that way I don't have to remove the sticks

I have looked at their cases before. Didn’t realize they had released these hard cases for the 2S.

Would you have any insight to the differences in the two below? They look identical. One is $119 and one is $99

SKU: P-16A-037

SKU: P-16B-077