Hi! Just got a RC 2 Pro and want to use it with my Air 3s and Mini 5 Pro. Both drones are already linked to RC 2 controllers. Anybody know the unlinking / linking process? Thanks!
I tried the Mini and it wouldn't go into link mode even with its RC 2 off. But the Air 3s linked just fine. Confusing!
Hi! Just got a RC 2 Pro and want to use it with my Air 3s and Mini 5 Pro. Both drones are already linked to RC 2 controllers. Anybody know the unlinking / linking process? Thanks!
There is no RC 2 Pro.
There is only an RC 2 and an RC Pro 2.
Google is your friend.
Results of Googling linking the RC Pro 2:
Step-by-step linking process:
Power on devices: Turn on both the DJI RC Pro 2 controller and the aircraft you wish to link.
Open DJI Fly app: Launch the DJI Fly app on the controller. If the controller is new, follow the initial setup instructions first.
Navigate to pairing settings:
From the home screen, tap Connection Guide in the bottom right corner.
Alternatively, go to Camera View, tap the ... icon in the top right, go to the Control tab, and scroll down to find Re-pair to Aircraft (Link).
Initiate linking: Tap Re-pair to Aircraft (Link) on the controller. The controller will begin to make a beeping sound.
Activate aircraft linking mode: Press and hold the power button on the drone until it beeps once, indicating it is in linking mode.
Confirm successful link: Wait for the linking process to complete. The beeping on the controller will stop, and the status indicators on both the controller and the aircraft will turn from blinking to solid green.
Note that in some instances it may appear that nothing is happening or it may fail. That happened on several attempt to pair my RC 2 with my Neo after it had been paired to my Mini 5 Pro. A further attempt saw a prompt for updating the firmware and after that it paired. Upon returning to the Mini 5 Pro I got another prompt to update the firmware which was apparently in order to create firmware that will allow either drones to pair because now I can simply start up either drone after using the other and pair it with no problem. There is no need to "unbind" it which is done by removing it from your account. Pairing is relatively straight forward once you've done it a few times. Now I can easily use my RC2 with either drone with only two or three minutes at the most involved in pairing.
