Controller?

[DaveLJ]

Hi

I recently acquired a used mavic 2 pro.
When I connect, the "screen" it is very different.
I can’t get satellites, it doesn’t show any map, I have no functions, (I guess because I have no satellites) I can’t calibrate the compass.

I have tried a friends Apple phone – we got satellites, but screen looked the same and I still couldn’t calibrate the compass. I had a short test flight and all flight functions worked (RTH worked as it should) The only issue was when first engaged, it hovered about 5M off of the ground.
I have tried a S10 phone, S23 and a Galaxy Tab A. I have tried a cable in the side and at the bottom of the controller.
I have noticed when I use the S23 I can access the settings in the top RH corner, but not with the other androids.
I live near an airport - could this prevent the controller from working correctly?
I have tried the drone at an oval about 9 KM away, with the same result.

Could the controller or GPS module be the issue?
Could a smart controller be the fix? I am interested, but was hoping to "play" with the drone first.

Also when outside, I get a Mag. Error – the take-off symbol won’t work. When inside, I don’t get the error ???? and I can use the take-off symbol – but cancel before starting the props.
I have a Mini 2, Aroo and a Cuta Copter, and have no issues when testing these in the back yard.

Any input will be appreciated.



Thanks in advance

 

[slup]

You're using the wrong app for a DJI Mavic 2 Pro according to your attached pics...

DJI apps can't be acquired through the app stores since several years back... you need to download them directly from DJI's web site & then sideload them to the mobile device.

The app for a Mavic 2 Pro is called DJI GO4 & can be downloaded from the link below (use the barcode there with your phone & it should start the download)

DJI Go 4 - Download Center - DJI