Hi Guys,
I'm a fairly new flyer and I'm trying to figure out if CSVViewer or some other utility will supply me with board temperatures after a flight.
The reason I'm asking is I'm currently flying a Mini, which has vents on the bottom of the aircraft, and I want to make sure that any accessory that I add IE. a bottom mounted strobe, will not cause the drone to overheat. I was figuring I could pull some temperature readings before mounting an accessory and then check again after a test flight with an accessory to be able to ensure that I'm not blocking the vents too much.
Moderator, feel free to redirect this post if it's not the correct forum.
Thanks,
John
I'm a fairly new flyer and I'm trying to figure out if CSVViewer or some other utility will supply me with board temperatures after a flight.
The reason I'm asking is I'm currently flying a Mini, which has vents on the bottom of the aircraft, and I want to make sure that any accessory that I add IE. a bottom mounted strobe, will not cause the drone to overheat. I was figuring I could pull some temperature readings before mounting an accessory and then check again after a test flight with an accessory to be able to ensure that I'm not blocking the vents too much.
Moderator, feel free to redirect this post if it's not the correct forum.
Thanks,
John