Customising your drone

[Max Headroom]

I have just seen this picture

I was thinking of getting a skin for mine but am unsure if it would take the weight over 249g has anyone here any advice and if you have used one please show us your drone.

 

[Phantomrain.org]

I know the Mini 2 Wet Suits do not put the drone over the weight limit.
so you should also be ok with a skin

New Product Release: Mavic Mini 2 Wet Suits - Storm Approved.

Thanks to the Mini 2 Power Increase we were able to create an Entirely New Wet Suit that will allow you fly in the Hard Rain or the Heavy Snow Storm. :oops: First we added a 4mm Bumper on the nose for all those wall bumps. lol We had a few of them already. We utilized a full 2mm...

mavicpilots.com

Phantomrain.org
Gear to fly in the Rain, Land on the Water.

 

[Cafguy]

Go for it!! They don't really weigh a thing.The adhesive they use is very substrate friendly, will do no damage to the Drone and they are pretty simple to apply. TIP: keep a blow dryer handy.

 

[Max Headroom]

Thanks.

 

[GFields]

You should be ok. But, if it does, you can always remove the skin.

 

[Dustydoug]

And who knows, if you do it right with the right colors and or patterns you may be able to keep birds from attacking lol.

 

[Squidinc]

From www.decalgirl.com

 

[Max Headroom]

Does anyone here know where i can buy a skin in the UK i looked at some .com sites and they are charging £14 postage for a £12 skin.

 

[Bad Santa]

Does anyone here know where i can buy a skin in the UK i looked at some .com sites and they are charging £14 postage for a £12 skin.

You can buy the pattern and take it to a sign shop.
I'm not sure it's cheaper than the other route but they might have a lot of vinyl you can choose from.