Designed a fan mount to cool the Mini 3 Pro when doing FW updates

[Rilot]

Printables

www.printables.com

Feel free to download and use.

You need an 80mm fan to complete.

It was made from a scan of the Mini 3 Pro and so clips in to place and seals over the vents perfectly.

 

[philztoy]

looks nice. I might have to print one of those up Thanks!

 

[rwilliam99]

Curious where you plug in the fan? That looks to be a DC computer fan?

 

[Rilot]

Curious where you plug in the fan? That looks to be a DC computer fan?

Just soldered a 5.5mm DC barrel socket to it. Can use prtetty much any 12V wall-wart that way.

 

[Phantomrain.org]

Before you consider this , they do have more stream line fans that fit under the drone, that may offer less drag an a better option.

Gear to fly your Mini 3 Pro in the Rain.
Phantomrain.org

 

[Rilot]

Before you consider this , they do have more stream line fans that fit under the drone, that may offer less drag an a better option.

Gear to fly your Mini 3 Pro in the Rain.
Phantomrain.org

Huh? It's not for flying with. It's for on the ground. Drag on a stationary object is not really an issue.

 

[Phantomrain.org]

Sorry I missed the title. Thank you for pointing that out.

Huh? It's not for flying with. It's for on the ground. Drag on a stationary object is not really an issue.

Phantomrain.org
Gear to fly in the Rain.

 

[Romi]

Nice job Rilot!

 

[agia57]

Just soldered a 5.5mm DC barrel socket to it. Can use prtetty much any 12V wall-wart that way.

Nice job and design. Have you considered using a 5V fan and power it from the charging hub? Just my $0.02 worth.

 

[Rilot]

Yeah, could do. I didn't have a 5v fan kicking around. Sounds like a good idea though.