DJI Fly connection guide, why so many choices.

[skered53-464]

Seeing as I only have a Air 2 and a mini 2, why do I get all 12 choices every time ? CAN THESE BE EDITED ? Is there anyway to do so ? My profile only has these two so why get all 12 choices every time ?.

 

[Yorkshire_Pud]

Doesn't the app automatically select the correct drone once the drone is switched on?

 

[hiflyer201]

like Pud said. Maybe you're not waiting long enough.

 

[hiflyer201]

Having said that, I've had more than one occasion where after waiting and waiting, I've had to re-boot my phone to solve the problem. I have a iphone 6s and I know that it's stretched about as far as it can go.

 

[Yaros]

My profile only has these two so why get all 12 choices every time ?.

You don't have to press on “connection guide” every time before you fly. Just connect your controller and wait, in a couple of seconds the screen will change to the camera view, or a “go fly” blue button will appear in the corner. The connection guide section should only be used when first connecting the drone to the controller, for example if the RC was used with another drone before. But if you have 2 different RC's one for the mini 2 and one for the air 2, just connect the respective RC into the phone and it will automatically work. If you're changing between the drones all the time but have only one RC, then you should maybe use the combination of buttons "Fn + Switch camera mode + Take photo" hold it for 3 seconds to get into pairing mode, if necessary, but again, this is only used if your RC was bind do another drone earlier.

 

[JDubyaM]

This /\ has been my experience as well. After getting over my enthusiasm ( impatience) to fly, I realized it will change to the Go Fly option momentarily.