DJI Fly shows authorization zone but no LAANC

[jjohnson23112]

Hey Guys - I am in Warsaw, Indiana a mile or so from a tiny airport "Warsaw Municipal Airport" DJI Fly has an authorization zone cross that extends pretty far around the airport but I don't see anything in B4UFly or Kityhawk or Airmap in terms of restrictions or shapes. So I believe it is not "controlled airspace." Am I good to just unlock the zone in DJI Fly and be careful? Or do I need to do anything else.

Thanks!

 

[iaincaradoc]

You should be fine with a manual unlock. Even the FAA's "Visualize It" shows it as Class G below 700 feet. I had a similar issue in Tempe, Arizona, and ended up having a chat with the local FAA personnel about the City of Tempe's misunderstanding of Class E airspace having a floor.

Just watch carefully for other aircraft.

 

[jjohnson23112]

You should be fine with a manual unlock. Even the FAA's "Visualize It" shows it as Class G below 700 feet. I had a similar issue in Tempe, Arizona, and ended up having a chat with the local FAA personnel about the City of Tempe's misunderstanding of Class E airspace having a floor.

Just watch carefully for other aircraft.

Thanks! That's helpful, appreciate it.