DJI mini 2 does not showing in COM Port under device manager

[saleem]

Hi i am trying to connect my drone as COM port to talk to drone but it does not show under device manager. Here is what I have tried as yet. 1. I used 3 computers 2. I installed DJI WIN drivers as well 3. I intstalled DJI assitance as well 4. I used 3 different cables every cable show camera folder in my computer. 5.I tried tobtalk using CIAjeepdoors gui but it does not show COM port please help me

 

[Yorkshire_Pud]

Have a look at

Gimbal calibration after repair, I am stuck, Mavic Mini but may apply to other models.

I rebuilt a gimbal from a crashed mini, I put the camera in a 'new' gimbal frame and motors. The camera works and the gimbal does the boot dance, moving about all three axis (which is a plus) seemingly perfectly to my eyes but comes up with gimbal stuck message etc. etc. as was more or less...

mavicpilots.com

I have that bookmarked for this purpose but seem to remember that it leads to other thread/s that need to be read.

 

[saleem]

Thanks for the reply.
After looking the thread I also tried to disable driver signature enforcement but no luck

I found one good sign

In device manager under view and then hidden device, i can see DJI in(vertual COM port) COM4 but cannot communicate with that