Drone Skin Owners; Questions.

z1ppster · May 26, 2018

Zapwrapz in the UK (I’m in the UK, better fit than decal girl IMHO)
DJI Mavic Air wraps skins decals | Vape mod wraps and skins on another level for vaping devices!

Perfect fit, easy to apply and comes with 3x battery skins too (although I bought an extra 3 batt skins for my additional batteries!)

Very pleased ..

DavidAllan · May 26, 2018

Very happy with skin from Decal Girl. If you go to their web site and sign up for e mail you will get a discount coupon or other offers like free shipping. Goes on pretty easily except I had to watch their tutorial a few times to get the correct placement for the folding prop arms.

Cheech Wizard · May 26, 2018

I purchased a matt black design from Big Lamps for $25. I like the black against the sky whether is a nice blue or crappy overcast. I't my first skin, so I can't compare the quality of the material to others. Applying the skin is just like doing a puzzle. I used a heat gun on low to help mold it around hard to get nooks and crannies. It ships from Thailand and took forever to get here in the U.S. It's fun and rewarding to see the finished product. I can easily see it between 1/4 and 1/2 mile away. I don't know if I would buy from this vendor again as I would like to compare the coverage and material of the other sources in previous comments on this post.

I bought my FAA registration numbers right here in the forum from Aerial-Pixel and they look great. I can't remember if they were $9 or $19, but this is my second set and I will only use these from now on.

Skin: Biglamp Designs
FAA decals: DECALS

Jonarbel · May 26, 2018

Decal girl webpage $20 after discounts. Quality product, very happy.

View media item 1904 View media item 1903

Aumoe · May 26, 2018

here are mine

Aumoe · May 26, 2018

selee · May 27, 2018

Decal girl... Very happy with it. Extremely well cut to fit. High quality material

woodys2512 · May 27, 2018

ScubaBob said:
DecalGirl. Happy with it. I like it because many locals and friends know my drone by my decals (Bald Eagle, Red, white and blue coloring) and when they see it they know it is me and not some weirdo taking photos of their private lives. Instead they will usually wave to me. I like the customization and personalization.

Like this ScubaBob might try and do something like this with the Union Jack

NeliusSpies · May 27, 2018

Decalgirl Fire &Rescue added my Reg no with no effort
$25 excl Postage-Shipped to South Africa
Excellent Quality
Followed a Youtube link to apply the smaller parts
Extremely happy with the end result
Should the need arise would definately get another one

Brett 21 · May 27, 2018

Thunderdrones said:
Just looking for opinions on people using a drone skin and are you happy with it.

Where did you buy it from?
What was the cost?
Was it good quality?
Was it easy to apply?
Are you happy with the look and end result?
Would you buy it again?

Thanks!

Rob

Brett 21 · May 27, 2018

Brett 21 said:
View attachment 38879 View attachment 38879 View attachment 38880 View attachment 38879 View attachment 38880

"Rusted Paint from Power Hobby,25.00 and comes with controller and three numbered battery stickers.Exceptional quality. Little challenging at first.Strongly suggest hair dryer and exact knife.Hair dryer for two reasons:1)makes it a little more elastic allowing you get it precise "stretchable",to an extent and 2)when it's in final spot,it will make it adhere better.Dont wail away in one slot,move it around while pressing out air bubbles.The xacto?Nice for detailing and trouble spots(like the 4 battery "bubble dots"that otherwise are hard to remove from sticker backsheet.Note;I don't use them as I prefer to hand catch/launch now,but if you plan on leg extensions,put that part of vinyl on them as they will not fit with stickers applied without tearing.With this kit from Power Hobby,plenty of leftover pieces to add or blend in,again with cacti knife.

NeliusSpies · May 27, 2018

NeliusSpies said:
Decalgirl Fire &Rescue added my Reg no with no effort
$25 excl Postage-Shipped to South Africa
Excellent Quality
Followed a Youtube link to apply the smaller parts
Extremely happy with the end result
Should the need arise would definately get another one

Former Member · May 27, 2018

NeliusSpies said:
Decalgirl Fire &Rescue added my Reg no with no effort
$25 excl Postage-Shipped to South Africa
Excellent Quality
Followed a Youtube link to apply the smaller parts
Extremely happy with the end result
Should the need arise would definately get another one

Any pictures?

大疆御Air · May 28, 2018

here mine Decal Girl Good quality and customer service.

NeliusSpies · Jun 21, 2018

Thunderdrones said:
Any pictures?

Simmo · Jun 21, 2018

BigLamp Designs.
$25
Tricky to install but take your time, you will get there!!
High quality Vinyl.

Cheech Wizard · Jun 21, 2018

Simmo said:
BigLamp Designs.
$25
Tricky to install but take your time, you will get there!!
High quality Vinyl.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Ummm I wasn't to impressed with the material... kid of papery.. doesn't stretch too well, to be fair, I haven't tried any other ones. I think next time I will just tape and spray paint.

AnzacJack · Jun 21, 2018

Designed mine myself and sent to a local vinyl printer company that does motor sport decals. Cost about $20 and they gave me 2 prints, each including the craft and 4 batteries

I’m happy with it.

Love the rust stickers. Very “fallout” in design. I may get some of them. Would love to be able to wrap my case with same theme