Get more from your Mavic
The largest Mavic community in the world
Join Us Now

Enterprise Zoom IMU calibration

thinglenn40

Member
Joined
Nov 26, 2017
Messages
14
Reaction score
11
Age
59
Recently I took my Enterprise out to fly it and I got a notification to calibrate my IMU. Several attempts following the pictures on what position to place the drone led to it just setting at about 95% on the first part. I searched videos but there weren’t any on the enterprise. I did read where the pictures showing which positions to place the drone were wrong. Moving the drone myself and just guessing the position I finally got it calibrated.

For future reference is there somewhere to find the correct sequence for positioning the drone?
 

lannes

Well-Known Member
Joined
Jul 27, 2017
Messages
1,668
Reaction score
904
Location
Australia
The different positions for the AC are pretty clear to me from the app onscreen directions.

Here is a video on IMU calibration

 

thinglenn40

Member
Joined
Nov 26, 2017
Messages
14
Reaction score
11
Age
59
The issue is the enterprise uses the DJI pilot app. The onscreen directions are different. I tried following them only to have it sit until it timed out.
 

lannes

Well-Known Member
Joined
Jul 27, 2017
Messages
1,668
Reaction score
904
Location
Australia
The issue is the enterprise uses the DJI pilot app. The onscreen directions are different. I tried following them only to have it sit until it timed out.

See 9.17 in the video, remember your looking at the AC from side on, not top down