Firmware failure

[Fearless Flight]

So I got my Mavic a while ago and finally got some nice weather and some time to fly so I charged everything up and turned everything on and the controller shows that a firmware update is needed. No problem, I go through the steps to updated the firmware but it will not update. I restarted everything several times and even trashed the Go 4 off my phone and reinstalled it. No go. Any other suggestions.

Then this screen pops up which I then hit the Update button. It acts like it starts updating and you can see the illustration that shows the little pieces flying into the box but I never get the paper airplane icon like everyone else does.

Instead it keeps going to this screen and keeps asking me to continue downloading but the percentage never gets above 1%.

 

[james_mav]

Have you tried using the DJI assistant to download thru your computer?

Mavic – Specs, FAQ, Tutorials and Downloads

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[msinger]

I had this problem when I installed the last update. I ended up pressing the "Continue Downloading" button about 6 times until it finally downloaded correctly.

If the download keeps failing, you could try disconnecting from your Wi-Fi network and download it over the cellular connection.

 

[Fearless Flight]

Thanks for the suggestions guys. Will try again this weekend.

 

[romarnv]

Had the same problem updating on Go App ( press continue every 2 secs), tried your suggestion disconnecting wi-fi. It worked, thanks for the info! A quick test flight outside my home and all is good!!

 

[Fearless Flight]

I ended up using Assistant 2 and doing it from the computer. Worked perfectly. Thanks guys!