I have finished the new firmware update for MVP2 and smart controller and don’t have access to waypoint 2.0 in intelligent flight mode can anyone help or has anyone else been Having similar issues?
Firmware update
- Thread starter Martincook
- Start date
Just scorched DJI app at the Play Store. All of us Android users should do the same. I have uninstalled and re-installed the app two times and still have to be airborne to run Waypoints 2.
SteveLeBigMac
Member
- Joined
- Aug 23, 2018
- Messages
- 17
- Reactions
- 14
- Age
- 60
I'm on Android (Samsung Galaxy s8+). I don't exactly have to fly when using Waypoints 2.0. But unlike some Youtube posters, I cannot shut off the AC or RC while planning a mission. If I do that, my planned mission disappears, although the next time I choose Waypoints, DJI GO offers to restore the previous planned but unsaved mission.
SteveLeBigMac
Member
- Joined
- Aug 23, 2018
- Messages
- 17
- Reactions
- 14
- Age
- 60
Hi
Android for the ‘Smart Controller’ has not been updated by dji with regards M2 Waypoints update as yet ( Well not in the UK anyway) so I’m assuming that’s is the issue, doubt it will be much longer now before update is out..
Android for the ‘Smart Controller’ has not been updated by dji with regards M2 Waypoints update as yet ( Well not in the UK anyway) so I’m assuming that’s is the issue, doubt it will be much longer now before update is out..
Has anyone tested RTH since update. Flew three batteries and it's not working kinda stop the starts moving very slowly. Tried cancelling RTH took a few goes to get to fly it back manually. Also noticed return at current altitude did not work either
Are you saying you have the new waypoints installed on your Samsung running on Android? I've installed also on a Samsung but can't get the new waypoints
I believe waypoints won't be available for Android users until the djigo4 app is updated for us still been rolled out may be in next few weeks
That's right, I'm running DJI GO 4.3.12 on my Samsung Galaxy S8+. You can check the version number in Settings > Apps > DJI GO, where the version number is at the end of the parameter listing. But to use the Waypoints 2.0 function, I must have the phone connected to the RC and the RC connected to the M2P, although I don't have to fly or activate the motors.
I am having the same problem after the latest MP 2 update. NO WAYPOINTS found with the other DJI GO 4 app flight modes. I have the latest version of the GO 4 App and even uninstalled it and reinstalled it. I also tried plugging the RC into the MP2 as someone suggested and no luck. Is anybody able to use the new Waypoints or even see it in the app with an Android phone? I have a Galaxy S-8.
Similar threads
