My mavic air, hovering at 12m (less than 1min into flight), decided to take off on its own.
I have line of sight of the drone.
Tried RTH button, joystick (elevation, yaw) movement, all failed.
No response from the drone.
Watched it crashed into trees.
Crashed, broken arm.
I had it repaired. Just got it back.
Powered on the drone without props (showed error 202).
Proceeded to update the firmware and recalibrate the sensors via laptop.
Once done, tested the joystick to make sure the motors are working fine.
At first all seems normal, then suddenly the motors sped up and errors started appearing.
These are similar symptoms I encountered when the drone crashed.
How do I investigate whether my drone is defective or not.
(Drone is grounded now).
I have line of sight of the drone.
Tried RTH button, joystick (elevation, yaw) movement, all failed.
No response from the drone.
Watched it crashed into trees.
Crashed, broken arm.
I had it repaired. Just got it back.
Powered on the drone without props (showed error 202).
Proceeded to update the firmware and recalibrate the sensors via laptop.
Once done, tested the joystick to make sure the motors are working fine.
At first all seems normal, then suddenly the motors sped up and errors started appearing.
These are similar symptoms I encountered when the drone crashed.
How do I investigate whether my drone is defective or not.
(Drone is grounded now).