I've read a lot of posts and watched vids of putting the gimbal carrier back under the 3 tabs after a crash. My gimbal popped out of the carrier which is still in place and unbroken. Has anyone had to put the gimbal back into the carrier?
Gimbal came out of carrier.
- Thread starter Waaz
- Start date
I've read a lot of posts and watched vids of putting the gimbal carrier back under the 3 tabs after a crash. My gimbal popped out of the carrier which is still in place and unbroken. Has anyone had to put the gimbal back into the carrier?
It is more broken than you think. Main carrier is broken as well as the ribbon cable. Just placing it back in will not help you.
Ask @Thunderdrones for recommendations.
Hope your back up and flying soon.
Good luck!
Thank you for mentioning me @Drone Master
OP, you have broken the end off of the gimbal plate that holds the gimbal motor assembly in place. The only way to repair it is by taking the top body off, dropping the gimbal out, and replacing it. Or have someone (like me) do it for you.
OP, you have broken the end off of the gimbal plate that holds the gimbal motor assembly in place. The only way to repair it is by taking the top body off, dropping the gimbal out, and replacing it. Or have someone (like me) do it for you.
Similar threads
