Gimbal motor load too large warning

[JohnnyD913]

I just replaced my power control module and gimbal control board on my mavic pro.
The reason I replaced is cause I had a bad battery and it leaked on power control module so I replaced both..
Before replacing I had no video either..
Now I have video but get this gimbal motor load too large warning and it ask me if I have removed gimbal clamp which of course I have.

It will try to reset the gimbal itself only to have same warning after that..

I don’t have the dji assistant cause I have no laptop at this time..

I think I also read that the gimbal will need recalibrated after this replacement cause the new board?
Is this true?
They say only dji can do this?
Thanks for any help..

One other thing, the camera isn’t level after start up, hangs down at angle..

Stays at 5% if I try to recalibrate

View attachment 98177.
These are my warningsView attachment 98178

 

[Thomas B]

I just replaced my power control module and gimbal control board on my mavic pro.
The reason I replaced is cause I had a bad battery and it leaked on power control module so I replaced both..
Before replacing I had no video either..
Now I have video but get this gimbal motor load too large warning and it ask me if I have removed gimbal clamp which of course I have.

It will try to reset the gimbal itself only to have same warning after that..

I don’t have the dji assistant cause I have no laptop at this time..

I think I also read that the gimbal will need recalibrated after this replacement cause the new board?
Is this true?
They say only dji can do this?
Thanks for any help..

One other thing, the camera isn’t level after start up, hangs down at angle..

Stays at 5% if I try to recalibrate

View attachment 98177.
These are my warningsView attachment 98178

I am unable to view the warnings. If they are movies upload to YouTube or similar and post the share links. If they are images upload them as jpeg from your library.
Then someone can try to help.
On the camera, make sure it is property held in the clips to the suspension on your drone.

 

[JohnnyD913]

I am unable to view the warnings. If they are movies upload to YouTube or similar and post the share links. If they are images upload them as jpeg from your library.
Then someone can try to help.
On the camera, make sure it is property held in the clips to the suspension on your drone.

Thomas B,
Yes sir I even bought a new camera mounting plate cause old one had worn out rubber bands
( shock absorbers).
I’ve tried both plates.
What next ribbon cable or gimbal motors?
Thank u

 

[Thomas B]

Thomas B,
Yes sir I even bought a new camera mounting plate cause old one had worn out rubber bands
( shock absorbers).
I’ve tried both plates.
What next ribbon cable or gimbal motors?
Thank u

I am not an expert... sorry.
Maybe you should send it to @djidroneservice
They’ll pay to ship and will diagnose for free. Members and forum staff have been very happy with them overall.

 

[JohnnyD913]

I am not an expert... sorry.
Maybe you should send it to @djidroneservice
They’ll pay to ship and will diagnose for free. Members and forum staff have been very happy with them overall.

Thank u for the link

 

[dirkclod]

That link is to the member.
this link is the one you need and I use them and you can’t beat the way they are set up.

DDS Drone Repair - Your Drone Repair Shop

www.djidroneservice.com

 

[JohnnyD913]

That link is to the member.
this link is the one you need and I use them and you can’t beat the way they are set up.

DDS Drone Repair - Your Drone Repair Shop

www.djidroneservice.com

Thank u

 

[JohnnyD913]

That link is to the member.
this link is the one you need and I use them and you can’t beat the way they are set up.

DDS Drone Repair - Your Drone Repair Shop

www.djidroneservice.com

Yea I just checked out their link..
Looks amazing..
Thank u so much for pointing me in their
Direction
JohnD913

 

[dirkclod]

Yea I just checked out their link..
Looks amazing..
Thank u so much for pointing me in their
Direction
JohnD913

Thomas pointed you just gave you his link not the Co.
They are venders and help supports us here but I do
business with them and endorse them .For what’s that’s
worth.

 

[DDS]

Yea I just checked out their link..
Looks amazing..
Thank u so much for pointing me in their
Direction
JohnD913

not sure if you created your ticket but you also get $35 off using "mavicpilots"

if you already submitted a ticket pm me your ticket number and will apply the discount should you decide to proceed with the repair.

Stay Safe!

 

[13 777]

[QUOTE = "JohnnyD913, должность: 961664, участник: 37015"]
Томас Б,
Да, сэр, я даже купил новую монтажную пластину камеры, потому что старая изношена резинками
( амортизаторы).
Я пробовал обе тарелки.
Какой следующий ленточный кабель или карданные моторы?
Спасибо
[/ QUOTE]
В чем была причина ?