Gimbal resetting???

[GMTCarlJ]

Today, my camera seems to have glitched mid-air. I was physically within 30 yards of my unit though as the flight wasn't affected during this erratic fluttering gimbal for a few seconds. Any thoughts? Mavic pro

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[Former Member]

Were you shooting at 4k for longer than 4 minutes? If so, downres, shoot shorter clips and report back.

 

[CarlStarke]

It’s the dreaded mid flight gimbal reset, I also get it randomly but not often.

 

[n-xplorer]

It’s the dreaded mid flight gimbal reset, I also get it randomly but not often.

I'm get this all the time now with my MA, gimbal will not stop shaking and jerking around. Gimbal reset doesn't work, only goes to 10% and stalls. Anyone have suggestions?

 

[Moose1967]

This is a Mavic Pro/Platinum thread.

 

[Moose1967]

Try formatting all memory cards FAT32 and clear the cache each trip out - re calibrate the IMU - make sure your on a gravel surface - reset camera settings - re calibrate the compass.

 

[DanMan32]

If card is greater than 32GB, has to format ExFAT to get full capacity.