Gimbal screws and replacing bracket on

[mini4pro]

I am in the middle of a gimbal repair for the mini 4 pro. I am missing one of the 3 elevated pieces attached to the pitch motor that connect to the gimbal rubber damper piece. I have put back together the entire gimbal already, and I would much rather superglue a plastic piece to the motor than fully disassembling the gimbal again and replacing the motor entirely.

I am also looking for replacement Philips 1 screws for the gimbal internals. does anyone have the specs on the screws? Can't seem to find anything about that anywhere. They have internal screws available on ebay, but for 40 dollars for 15 tiny screws, that price is pretty ridiculous.

Any help is much appreciated!

 

[mini4pro]

picture for reference

 

[Cafguy]

and I would much rather superglue a plastic piece to the motor than fully disassembling the gimbal again and replacing the motor entirely.

You are much better off taking the time to do it correctly. If you are flying under part 107 and carry insurance then it must be repaired back to manufacturers specs.