DJI Mini 3 Pro Gimbal Camera Turns Horizontal to Portrait and keeps looping after doing a gimbal replacement

Georgerom · Saturday at 11:08 AM

justinmercer said:
How to Calibrate Gimbal on DJI Mini 3 Pro

Hi everyone, in this guide, I'll show you how to calibrate the gimbal camera on the DJI Mini 3 Pro drone. Download links Python:...

www.ifixit.com

This method will not work with Mini3 pro because you will not find any COM port for it.

Georgerom · Saturday at 11:09 AM

Cafguy said:
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

This method will not work with Mini3 pro because you will not find any COM port for it.

Georgerom · Saturday at 11:11 AM

Go here this will take off all the errors except one which only DJI can but that will not affect your footage or anything else.

DJI mini 1, mini 2, mini se,mini 3pro air2, air2s ERRORS 40011 and 40021 removal | eBay

That error will not affect your flying in any way, the drone will function as normal. Will appear for a few seconds when you start the drone and then will close.

www.ebay.com

Georgerom · Saturday at 11:22 AM

justinmercer said:
Already did that and it made the gimbal move but it's like the rest position (start position) is backwards, I replaced all the motors as well as the ptz cable is there a specific way the motors go in I noticed one had an arrow on it?

No matter what you did to that gimbal you need to recalibrate the gimbal and it is working only with a specific tool that DJI uses it. Python will not do it
.

justinmercer · Saturday at 11:23 AM

Can I have some links to the files please

?

Georgerom · Saturday at 11:42 AM

justinmercer said:
Can I have some links to the files please ?

There is no link available. I paid a hefty $500 for that soft. I need it because I repair drones for a living.
There is more to be done to make it work properly.