DJI Mini 3 Pro Gimbal Camera Turns Horizontal to Portrait and keeps looping after doing a gimbal replacement

[Georgerom]

How to Calibrate Gimbal on DJI Mini 3 Pro

Hi everyone, in this guide, I'll show you how to calibrate the gimbal camera on the DJI Mini 3 Pro drone. Download links Python:...

www.ifixit.com

This method will not work with Mini3 pro because you will not find any COM port for it.

 

[Georgerom]

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

This method will not work with Mini3 pro because you will not find any COM port for it.

 

[Georgerom]

Go here this will take off all the errors except one which only DJI can but that will not affect your footage or anything else.

DJI mini 1, mini 2, mini se,mini 3pro air2, air2s ERRORS 40011 and 40021 removal | eBay

That error will not affect your flying in any way, the drone will function as normal. Will appear for a few seconds when you start the drone and then will close.

www.ebay.com

 

[Georgerom]

Already did that and it made the gimbal move but it's like the rest position (start position) is backwards, I replaced all the motors as well as the ptz cable is there a specific way the motors go in I noticed one had an arrow on it?

No matter what you did to that gimbal you need to recalibrate the gimbal and it is working only with a specific tool that DJI uses it. Python will not do it
.

 

[justinmercer]

Can I have some links to the files please ?

 

[Georgerom]

Can I have some links to the files please ?

There is no link available. I paid a hefty $500 for that soft. I need it because I repair drones for a living.
There is more to be done to make it work properly.

 

[Cafguy]

There is no link available. I paid a hefty $500 for that soft

Not to change the subject BUT Only 500 ??? where perhaps?

 

[Droning on and on...]

Not to change the subject BUT Only 500 ??? where perhaps?

Does DJI have and support a 3rd-party repair program?

 

[Xenocatalyst]

How to Calibrate Gimbal on DJI Mini 3 Pro

Hi everyone, in this guide, I'll show you how to calibrate the gimbal camera on the DJI Mini 3 Pro drone. Download links Python:...

www.ifixit.com

Im looking for this fix too, i just followed the link and noticed this on the webpage
"As of 28 Dec 2022, DJI Firmware Tools does not support the Mini 3 Pro"
Bummer, Why not? Is there another way?

also note that my mini 3 pro also doesn't show in device manager as connect to a com port

 

[skymapper]

Try contacting him
I found him on youtube

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[Rovi]

I noticed one of the errors as saying to make sure the gimbal all 3 axis are free

I noticed several other errors including critical low battery, try to address those issues as well.
As far as the gimbal, try cleaning the gimbal with compressed air like from a computer component cleaner.
Gently rotate the gimbal by hand and feel for rough spots.
Have you had an accident with the drone where the drones camera would have hit the ground, even while not flying?
Try running DJI assistant on the drone and check for firmware updates and camera issues if allowed by the software for your drone.