Good morning from Dayton Ohio

[BSTEG99]

Just ordered a new Mavic 2 Zoom upgrading from P3P. Any tips/comments welcome.

 

[dirkclod]

Welcome to Mavic Pilots .
I hope you will find our site helpful and look forward to any input , photo's/video's you might post .
Don't be shy and ask anything if you can't find it by searching .

 

[msinger]

Welcome to the forum!

Any tips/comments welcome

You can find lots of great tips at MavicHelp.com.

 

[Thomas B]

Welcome to the forum from the Arizona deserts! Enjoy.

Even with your prior experience I’d recommend reading the full manual (about 70 pages) for your Zoom. I keep my manuals on my phone for reference. Get it here:

https://dl.djicdn.com/downloads/Mavic_2/20190417/Mavic_2_Pro_Zoom_User_Manual_v2.0_en_.pdf

 

[Greg Webb]

Welcome to the Forum from the Nature Coast of Florida! Enjoy!!

 

[Aerial-Pixel]

Just ordered a new Mavic 2 Zoom upgrading from P3P. Any tips/comments welcome.

Welcome to MavicPilots also from Dayton Ohio (work in Dayton, live in Franklin)! Enjoy your new Mavic 2 Zoom, Fly safe and have fun!

 

[BSTEG99]

Thanks to all for the suggestions and advice. Hello to Aerial-Pixel. Live in Kettering actually.

 

[BSTEG99]

Maiden flight this morning and all is well. Still can’t determine how to set the anti-flicker rate to 60hz and keep it there in manual mode. I can select 60hz in auto mode but when I return to manual mode the selections are greyed out. I was able to do that with my P3P as I recall. I’m sure it is operational error on my part.

 

[BigAl07]

Welcome to the forum

 

[BSTEG99]

After further research, it appears that the anti-flicker setting is intentionally not selectable in manual mode-only auto mode. Concern solved.

 

[Smokieflies]

Belated Welcome for another flier from Ohio. Good flying.