Had the dreaded gimbal overload message yesterday!

[Platinumproman]

Hi guys,
As per the above, booted the Mavic up yesterday wanting to get some footage. Gimbal was doing some funny things and was kinda in a fixed position but pointing up and could not be adjusted on the controller. Did a couple of reboots and still no good. I ended up giving the gimbal a gently poke and it freed allowing me to get the footage I wanted. Just booted up again and it seems fine, having had a visual inspection and doing a calibration I noticed that the screw under the camera lens looks loose? I’m guessing this is not normal?
Please see image attached.
Cheers

 

[Abfly]

Hi, I checked the screw on my mavic pro. Same position, so I dont think that' s the problem.

 

[Platinumproman]

Thanks man, at least it rules that out. It may have just been a temporary glitch. I’ve read it’s a common issue. I’ve only flown about 12/12 times and without collisions so not down to damage.

 

[msinger]

having had a visual inspection and doing a calibration I noticed that the screw under the camera lens looks loose? I’m guessing this is not normal?

Yes, that's normal.