Help with mavic pro platinum blades please

[GavieboyDji]

I've just got back from testing my new blades and n.d filters and when I started hovering I got the gimble shake message for a couple of seconds but the worst bit was when I flicked it into sports mode to do a bit of flying to see what the new blades was like well the pro didn't like that one bit. It was shaking like mad.

Do I need to turn something down or put some sensitivity settings in seems like the good old nitro helicopters days when I had to set up the tail. Please help It sounded horrible in sports mode. Thanks
Gavin u.k

 

[Dave A]

Are these aftermarket blades or DJI OEM blades? If not authentic DJI blades then most likely that is your problem.

 

[GavieboyDji]

Are these aftermarket blades or DJI OEM blades? If not authentic DJI blades then most likely that is your problem.

Oem blades from dji

 

[MacPhersonCa1]

Calibrate your IMU. I have had the same problem and that fixed it for me.

 

[GavieboyDji]

Calibrate your IMU. I have had the same problem and that fixed it for me.

Seen on YouTube it's something to do with the gain settings you got to turn down sensitivity by increments of 3 till it stops vibrations here's the video.